Fiber Sensors Best Selection Catalog OMRON's Fiber Sensors continue to support an increasing range of applications. This catalog brings you the latest information on our Fiber Units. E32-series Fiber Units Amplifier Units E3X-DA-S/-MDA Series E3X-NA Series Standard Models First, Our Standard Lineup P6 These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces and positioning. A Wide Variety of Shapes for Adapting to Different Installation Locations Choose the model that suits the installation space from a wide variety of shapes and sizes (7 shapes, in standard or small sizes). Space Savings and Simple Mounting Flat Models Flat models that allow simple screw mounting and straightforward wiring have been added to the lineup. Using these models eliminates the problem of fibers getting caught on surrounding objects. Flat model Detect Workpieces in Tight Spaces Custom-produced Sleeves Screw-shaped Cylindrical Flat Equipped with sleeve Models with sleeves allow detection in tight spaces. We will perform the time-consuming task of fashioning the sleeve, with a length and bends to suit the space (except for ultrafine sleeves). Models with sleeves Flexible, Pliable Fiber That Can Be Handled Like Wire We have developed a broad range of fibers to meet a wide variety of needs. Multicore (flexible) fiber is a new type of standard fiber that can be used like wire without worrying about the bending radius. We have also produced fiber that will not break when used in moving parts and fiber that is not degraded by contact with oil. Conventional fiber Flexible fiber You will certainly appreciate the ease of use that flexible fiber ensures. Length Can Be Specified in 1-m Units Saving Energy and Work We will produce fiber of the required length (in meter units). For large-scale installations, specifications of up to 20 m can be handled. (Specifications of 0.3 m and 0.5 m are also possible.) Detection with Increased Reliability Special-beam Models P10 A variety of heads incorporating the latest optical technology makes it possible to solve common problems related to detection and to increase reliability. Resistant to dust and dirt Capable of detecting small workpieces Resistant to workpiece vibration Use these models to handle unstable detection conditions. Environmentresistive Models Small-spot models E32-C42+ E39-F3A Area-sensing models E32-T16J Limited-reflective models High-power models E32-T17L E32-L24L High Resistance to External Conditions with Fiber P14 We have developed model variations for adapting to a variety of environmental conditions. These models enable detection in high-temperature environments and vacuums. High-temperature environments Environments subject to the splattering of chemicals Vacuums Use these models to handle applications in special environments. Heat-resistant models Applicationcorresponding Models Chemical-resistant models Fiber Units for the Food-packaging, Semiconductor, and FPD Industries P16 These models, which were developed for specific applications, offer top-quality detection performance. Label detection Liquid-level detection Alignment and mapping of glass substrates Wafer mapping Use these models for specific applications. Label-detection models Alignment-check models Liquid-level detection models E32-G14 E32-L16 E32-D36T Selection Guide Fiber Units We have developed model variations for handling a broad range of applications. Amplifier Units Fiber Units Detection conditions Environmental conditions Standard Models Standard detection P.6 Environment-resistive Models Positioning Level differences Special-beam Models Marks Workpiece presence Positioning Level difference P.10 Long-distance sensing, resistance to dust and dirt Small beam, resistance to rattling Detection of transparent objects High power Small spot Area sensing Retroreflective sensing Application-corresponding Models Applicationcorresponding P.14 Workpiece presence Positioning Level differences and marks Workpiece presence Specialbeam High-temperature environments (up to 400C) Environments subject to scattering of chemicals and oil Vacuum environments Special environments Standard environments P.16 Labels Liquid level Alignment and mapping of glass substrates Wafer mapping Labels Liquid level Alignment Mapping Amplifier Units Type Digital Manual Appearance Response time 2-channel models 100 s, 1 ms, or 4 ms 48 s, 1 ms, or 4 ms (2-output models: 80 s, 1 ms, or 4 ms) Light source Red, green, blue, or infrared LED Function Models 4 200 s (high-speed models: 20 s) Red or green LED Dual display (including digital, bar, percent, and hold display functions) Threshold adjustment performed manually or by teaching OFF-delay, ON-delay, one-shot timer (adjustable from 1 ms to 5 s) LED bar display (5 levels) 8-turn sensitivity adjuster OFF delay timer (fixed at 40 ms) Advanced-function models are available (2-output/input models). Water-resistant models are available. E3X-DA@-S E3X-DA@TW-S (2-output model) E3X-DA@RM-S (input model) E3X-MDA@ E3X-NA@ E3X-NA@F (high-speed model) E3X-NA@V (water-resistant model) CONTENTS Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4 Overview of Features, Applications, and Variations Standard Models Flexible (New Standard) . . . . . . . . . . . . . . . . . . P6 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6 Break-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . P6 Fluorine Coating . . . . . . . . . . . . . . . . . . . . . . . . . . P7 Special-beam Models Long Distance, High Power . . . . . . . . . . . . . . P10 Ultracompact, Ultrafine Sleeve . . . . . . . . . . . . . . P10 Coaxial, Small Spot . . . . . . . . . . . . . . . . . . . . . . . P11 Fine Beam (Narrow Vision Field) . . . . . . . . . . . . P12 Area Sensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . P12 Retroreflective . . . . . . . . . . . . . . . . . . . . . . . . . . . P13 Convergent-reflective . . . . . . . . . . . . . . . . . . . . . P13 Environment-resistive Models Heat-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . P14 Chemical-resistant. . . . . . . . . . . . . . . . . . . . . . . . P14 Vacuum-resistant . . . . . . . . . . . . . . . . . . . . . . . . P15 Application-corresponding Models Label Detection. . . . . . . . . . . . . . . . . . . . . . . . . P16 Liquid-level Detection . . . . . . . . . . . . . . . . . . . . . P16 Glass-substrate Alignment . . . . . . . . . . . . . . . . . P17 Glass-substrate Mapping . . . . . . . . . . . . . . . . . . P17 Water Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . P18 Ordering Information Through-beam Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P19 Fiber Units with Reflective Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P25 Application-corresponding Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P30 Ratings/Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P34 Dimensions Through-beam Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P36 Fiber Units with Reflective Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P42 Application-corresponding Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P47 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P51 5 Features/Applications Standard Models R Flexible (New Standard) * Perform wiring without worrying about the bending radius. * Choose the model to suit the installation space from a variety of shapes. Flexible fiber Conventional fiber Feature: Multicore (Flexible) Fibers Cores Cladding A large number of ultrafine cores are all surrounded by cladding. As a result, the fiber is flexible and can be bent without significantly reducing the light intensity. This helps solve problems, such as fiber being broken by getting caught on other objects. Ratings/Characteristics Fewer problems Light intensity affected by bends in fiber Fiber broken by getting caught on surrounding objects Min. sensing 0.005-mm dia. object Min. bending 1 mm radius Ambient tem-40C to 70C (no icing or condensation) perature range Fiber material Plastic Standard Feature: Flat Models * Choose the model to suit the installation space from a variety of shapes. * New flat models allow space savings and simple installation. Flat models, which allow simple attachment and wiring, have been added to the lineup. Choose the model to suit the installation space from 3 sensing directions and 2 sizes, standard and small. Ratings/Characteristics Min. sensing 0.005-mm dia. object Min. bending 10 or 25 mm* radius Ambient tem-40C to 70C (no icing or condensation) perature range Screw-shaped Cylindrical Flat Equipped with sleeve Fiber material Plastic *Depends on the fiber diameter. Break-resistant * Bundle-fiber models can be used for moving parts. * Capable of withstanding at least one million repeated bends (in typical applications). B Feature: Bundle Fibers The Fiber Units contain a large number of independent fine fibers, ensuring a high degree of flexibility. Ratings/Characteristics Min. sensing 0.005-mm dia. object Min. bending 4 mm (withstands repeated bending) radius Ambient tem-40C to 70C (no icing or condensation) perature range Fiber material Plastic 6 iiAEEAEvEaEPA[EVEaEi Standard Models Fluorine Coating U * Fiber degradation due to oil is prevented using a fluo- Feature: Fluorine Coating roresin coating. (Cross section) * Free cutting is possible with cutter provided. Fluororesin coating Fluororesin is used as the sheath material to prevent fiber degradation resulting from oil adhesion. Oil is blocked! Note: The tip of the head is not chemical-resistant. Ratings/Characteristics Min. sensing object 0.005-mm dia. Min. bending radius 4 mm Ambient tem-40C to 70C (with no icing or condensation) perature range Fiber material Plastic Aplicable Models Standard models Fiber Length vs. Sensing Distance Through-beam Fiber Units Fiber Units with Reflective Sensors (Fiber length of 2 m corresponds to (Fiber length of 2 m corresponds to 100%.) 100%.) Model Number Used for Ordering Standard model number + Fiber length Fiber length: 0.3 m, 0.5 m, or any length from 1 to 20 m (in 1-m units) Sensing distance (%) Fiber Length This customization/delivery service applies to standard models. It is aimed at reducing industrial waste and simplifying the installation procedure. Sensing distance (%) (Fiber Length, Sleeve Fiber Customization Service Length, and Bends) 100 80 60 100 80 60 40 40 20 20 0 2 5 10 15 20 0 2 5 10 Fiber length (m) Sleeve Length and Bends Applicable Models E32-TC200B/E32-TC200F E32-DC200B/E32-DC200F The E32-DC200B cannot be bent. 15 20 Fiber length (m) Model Number Used When Changing Only the Sleeve Length L Model: E32- *1 C200 *2 -S *3 Model Number Used When Changing the Sleeve Length and Bends Total length L1 R Total length L2 R Model Numbers Incorporating the Bending Radius, R, and Dimensions L1 and L2 Specifying L1 Only (Units: mm) Specifying L2 Only (Units: mm) Bending radius R5 R7.5 R10 R12.5 L1 (1) Model number 10 E32- *1 C200 *2 -S *3 A1 15 E32- *1 C200 *2 -S *3 A2 12.5 E32- *1 C200 *2 -S *3 B1 17.5 E32- *1 C200 *2 -S *3 B2 15 E32- *1 C200 *2 -S *3 C1 20 E32- *1 C200 *2 -S *3 C2 17.5 E32- *1 C200 *2 -S *3 D1 22.5 E32- *1 C200 *2 -S *3 D2 Bending radius R5 R7.5 R10 R12.5 L2 (1) Model number 5 E32- *1 C200 *2 -S *3 A3 10 E32- *1 C200 *2 -S *3 A4 7.5 E32- *1 C200 *2 -S *3 B3 17.5 E32- *1 C200 *2 -S *3 B4 10 E32- *1 C200 *2 -S *3 C3 20 E32- *1 C200 *2 -S *3 C4 12.5 E32- *1 C200 *2 -S *3 D3 22.5 E32- *1 C200 *2 -S *3 D4 *1: Insert "T" for Through-beam Fiber Units and "D" for Fiber Units with Reflective Sensors. *2: Insert the "B" or "F" that appears at the end of the original model number. *3: Insert "50" if the total length is 50 mm. The total length must not exceed 120 mm. 7 Features/Applications Standard Models Sensing distance (mm) (See note 1.) Model Overview of Model Variations Through-beam Fiber Units Type Flexible (New Standard) (See note 2.) R Standard Break-resistant Fluorine coating U B (Cross section) Fluororesin coating Shape of head Screw-shaped Flexible and pliable M4 Withstands repeated bending 530 760 Cable protected against oil 680 680 (top-view) E32-T11R M3 E32-TC200 130 E32-T21R (with sleeve) M4 (1.2-dia. sleeve) M3 (0.9-dia. sleeve) Cylindrical 220 E32-TC200E 530 E32-TC200BR E32-T11U 200 E32-T21 760 E32-TC200B 130 E32-TC200FR 3 dia. E32-T11 220 E32-TC200F 530 760 680 (top-view) E32-T12R 1.5 dia. E32-T12 130 E32-T222R 3 dia. E32-T12B 220 E32-T222 210 200 E32-T22B 460 (side-view) E32-T14LR 1 dia. E32-T14L 50 E32-T24R Flat 15 x 8 x 3 130 E32-T24 530 760 680 (top-view) E32-T15XR 12 x 7 x 2 E32-T15X 130 E32-T25XR (side-view) 15 x 8 x 3 E32-T25X E32-T15YR 130 E32-T25Y 210 E32-T15ZR 12 x 7 x 2 460 E32-T15Z 50 E32-T25ZR E32-T25XB 460 50 15 x 8 x 3 150 E32-T15Y E32-T25YR (flat-view) 220 210 12 x 7 x 2 E32-T15XB 130 E32-T25Z Note 1. The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 2. These symbols are defined as follows. : Bendable fiber, R : Flexible fiber, B U : Fluorine-coated fiber. 8 iiAEEAEvEaEPA[EVEaEi Standard Models Sensing distance (mm) (See note 1) Model Overview of Model Variations Fiber Units with Reflective Sensors Type Flexible (New Standard) (See note 2.) R Standard Break-resistant Fluorine coating U B (Cross section) Fluororesin coating Shape of head Screw-shaped Flexible and pliable M6 Withstands repeated bending 170 300 Cable protected against oil 170 170 (top-view) E32-D11R M3 E32-DC200 30 E32-D21R (with sleeve) M6 (2.5-dia. sleeve) M3 (1.2-dia. sleeve) Cylindrical 80 E32-DC200E 170 E32-DC200BR E32-D11U 30 E32-D21 300 E32-DC200B 30 E32-DC200FR 3 dia. E32-D11 80 E32-DC200F 170 230 70 (top-view) E32-D12R 3 dia. (1.5 dia.) E32-D12 30 E32-D22R 6 dia. E32-D221B 80 E32-D22 45 30 E32-D22B 110 (side-view) E32-D14LR 2 dia. E32-D14L 15 E32-D24R Flat 30 E32-D24 170 15 x 10 x 3 300 170 (top-view) E32-D15XR 12 x 7 x 2 E32-D15X 30 E32-D25X 80 E32-D25X 40 15 x 10 x 3 E32-D15XB 50 E32-D25XB 100 (side-view) E32-D15YR 12 x 8 x 2 E32-D15Y 8 E32-D25YR 20 E32-D25Y 40 15 x 10 x 3 100 (flat-view) E32-D15ZR 12 x 8 x 2 E32-D15Z 8 E32-D25ZR 20 E32-D25Z Note 1. The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 2. These symbols are defined as follows. : Bendable fiber, R : Flexible fiber, B U : Fluorine-coated fiber. 9 Features/Applications Special-beam Models Long Distance, High Power * Powerful beam reduces influence of dust and dirt. * Long sensing distance enables use in large-scale installations. Applications Detecting parts inside (trans- Detecting workpieces in lucent) containers coating processes E32-T11L E32-T17L Ratings/Characteristics Ambient tem-40C to 70C (no icing or condensation) perature range E32-T14 Fiber material Plastic Overview of Model Variations Refle- Through-beam ctive Type Features Shape, sensing distance (mm)* 20,000 Equipped with large lens 3,400 Side-view, screw mounting E32-T14 1,330 M4 screw Model number E32-T17L E32-T11L Equipped with large lens 700 E32-D16 M6 screw 400 E32-D11L Ultracompact, Ultrafine Sleeve * Ultracompact head can be installed in tight spaces. * Ultrafine sleeve ensures reliable detection of small objects, such as electronic components. Applications Alignment inspections Detection of terminals E32-D33 1 dia. E32-T33-S5 3 dia. E32-T223R 0.22 dia. 3 dia. 0.5 dia. E32-T334-S5 Ratings/Characteristics Min. sensing 0.005-mm dia. object Ambient tem- -40C to 70C (no icing or condensation) perature range Material Plastic E32-D33 Overview of Model Variations Refle- Through-beam ctive Type Features Shape, sensing distance (mm)* 130 E32-T223R 0.5-dia. sleeve (0.25-dia. opening) 44 E32-T33-S5 0.22-dia. sleeve (0.1-dia. opening) 5 E32-T334-S5 1-dia. cylinder 0.8-dia. sleeve 16 E32-D33 0.5-dia. sleeve 3 E32-D331 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 10 Model number iiAEEAEvEaEPA[EVEaEi Special-beam Models Coaxial, Small Spot * Small spot diameter (0.1 mm min. in diameter) enables Applications the reliable detection of small workpieces. Detecting of CDs * Use of red light ensures easy visual recognition and simple positioning. E32-C31+ E39-F3C Ratings/Characteristics Min. sensing object E32-C42+ E39-F3A 0.005-mm dia. Ambient tem-40C to 70C (no icing or condensation) perature range Fiber material Plastic Overview of Model Variations Coaxial, reflective Type Features Shape, sensing distance (mm)* Model number Coaxial, M6 screw 300 E32-CC200 Coaxial, 3-dia. cylinder 150 E32-D32L Small spot 0.1-dia. spot at a distance of 7 mm E32-C41+ E39-F3A-5 Small variable spot Spot diameter variable in the range 0.1 to 0.6 mm at distances in the range 6 to 15 mm E32-C42+ E39-F3A Long distance, small spot 0.5-dia. spot at 17 mm E32-C31+ E39-F3B Long distance, parallel light Spot diameter of 4 mm max. at E32-C31+ distances in the range 0 to 20 mm E39-F3C *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 11 mm 6 mm 7 mm 17 mm 0.1 mm dia. spot E32-C41+ E39-F3A-5 15 mm Variable from 0.1 to 0.6 dia. E32-C42+ E39-F3A 20 mm 4 mm dia. 0.5 mm dia. E32-C31+ E39-F3B E32-C31+ E39-F3C 11 Features/Applications Special-beam Models Fine Beam (Narrow Vision Field) * Fine beam reduces unwanted light in surrounding area. * Powerful beam allows use in applications requiring a long sensing distance. Approx. 60 Applications Alignment inspection of orientation flats Approx. 4 E32-T22S Ratings/Characteristics Min. bending radius 10 mm Ambient tem-40C to 70C (no icing or condensation) perature range 1300 mm E32-T24S Fiber material Plastic Overview of Model Variations Through-beam Type Features Shape, sensing distance (mm)* Model number Top view 1,900 E32-T22S Side view 1,300 E32-T24S *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Area Sensing * These Fiber Units ensure greater reliability with the de- Applications tection of position inconsistencies in passing workpieces and the presence of workpieces with holes. Detecting passage of * Wide sensing bands of 11 and 30 mm (through-beam candies models) enable the detection of large position inconsistencies. 11 mm Detecting chips on film E32-T16WR E32-T16PR Ratings/Characteristics 30 mm Ambient tem- -40C to 70C (no icing or condensation) perature range E32-T16W@ only: -25C to 55C Fiber material Plastic E32-T16WR E32-D36P1 Overview of Model Variations Reflective Through-beam Type Features Shape, sensing distance (mm)* Model number Sensing width: 11 mm 840 Sensing width: 11 mm Flat-view 750 E32-T16JR Sensing width: 30 mm 1,300 E32-T16WR Beam width: 11 mm E32-T16PR 150 E32-D36P1 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 12 iiAEEAEvEaEPA[EVEaEi Special-beam Models Retroreflective * The return optical path ensures that more light is interrupted by transparent workpieces than with through-beam models. * Equipped with MSR function to eliminate light reflected directly from the workpiece. Applications Detecting translucent medicine E32-R21 Ratings/Characteristics Ambient temperature range E32-R21: -40C to 70C E32-R16: -25C to 55C (with no icing or condensation) Fiber material Plastic E32-R16 Overview of Model Variations Retroreflective Type Features Shape, sensing distance (mm)* MSR function, M6 screw Model number 250 E32-R21 MSR function, screw mounting, long distance 1,500 E32-R16 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Limited-reflective * Limited-reflective models eliminate light reflected from distant objects. * Small level differences can be reliably detected. * The optical-axis direction can be selected according to the installation space. Applications Detecting connector pins Detecting wafers (glass substrates) E32-L25L Non-detection range Detection range E32-L24L Ratings/Characteristics E32-L24L Min. sensing object 0.005-mm dia. Fiber material Plastic 200C models only: Glass Overview of Model Variations Limited-reflective Type Features Ultracompact, flat-view Ideal for checking stocks of glass substrates Heat-resistant up to 105C, top-view Shape, sensing distance (mm)* Model number 0 to 4 E32-L24S 5.4 to 9 E32-L25L (center: 7.2) Wide sensing range, flat-view 0 to 15 E32-L16 Heat-resistant up to 200C, flat-view 4 to 10 E32-L86 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 13 Features/Applications Environment-resistive Models Heat-resistant * These Fiber Units can be used for various applications in temperatures up to 400C. Applications Detecting wafers in high-temperature environments E32-T61-S Ratings/Characteristics 200C and higher models E32-T81R All other models E32-D81R 150C models Min. bending radius 35 mm 10 mm 25 mm Glass (fluoFiber material (fluororesin coating) roresin coating) Plastic E32-T84S-S Glass (SUS spiral coating) Overview of Model Variations Reflective Through-beam Type Ambient temperature range Features Shape, sensing distance (mm)* -40C to 150C M4 screw 760 -40C to 200C L-shaped, long distance Model number E32-T51 1,300 E32-T84S-S -60C to 350C M4 screw 450 E32-T61-S -60C to 350C M6 screw 90 E32-D61-S -40C to 400C M6 screw, with sleeve 60 E32-D73-S *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Chemical-resistant * Built-in lens and high-power beam reduce the influence of dirt and drops of water. * Round design prevents drops of water sticking to the head (E32-T11F). Applications Detecting workpieces in cleaning processes E32-T12F Ratings/Characteristics Ambient temperature range E32-T14F All other models E32-T51F E32-T81F-S -40C to 70C -40C to 150C -40C to 200C Plastic Fiber material (fluororesin coating) Glass (fluororesin coating) Overview of Model Variations Reflective Through-beam Type Features Shape, sensing distance (mm)* Model number Water-resistant round head 2,000 E32-T11F Built-in lens, high power 3,000 E32-T12F Heat-resistant up to 200C Built-in lens, high power 700 95 E32-T81F-S E32-D12F *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 14 iiAEEAEvEaEPA[EVEaEi Environment-resistive Models Vacuum-resistant * These models can be used in high-vacuum environ- Applications (Configuration Example) ments at pressures from 10-5 to 0.1 Pa. Vacuum chamber Atmospheric-pressure side Vacuum side Lens Unit E39-F1V * The 4-channel multi-flange, which has a maximum leakage rate of 1x10-10 Pa*m3/s, contributes to space savings. Fiber Unit on vacuum side (set of 2) Flange E32-T51V E32-VF4 (4 CH) E32-T54V E32-VF1 (1 CH) E32-T84SV Fiber Units on atmosphericpressure side (set of 2) E32-T10V Amplifier Unit E3X-DA-S E3X-NA Ratings/Characteristics 120C models Min. bending radius 200C models 30 mm Atmosphericpressure side 25 mm Fiber mate- Glass (fluorores- Glass (SUS in coating) spiral coating) rial Plastic Overview of Model Variations Through-beam Type Features Shape, sensing distance (mm)* Model number M4 screw, top-view, heat-resistant up to 120C, long distance 1,000 L-shaped, heat-resistant up to 120C 130 E32-T54V 1M L-shaped, long distance, heat-resistant up to 200C 480 E32-T84SV 1M E32-T51V+ E39-F1V *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Fiber Units on Atmospheric-pressure Side Appearance Type Model number Common E32-T10V 2M Type Model number 4-channel flange E32-VF4 1-channel flange E32-VF1 Flanges Appearance Ratings/Characteristics Item Number of channels Model 4 channels 1 channels E32-VF4 E32-VF1 Leakage rate 1x10-10 Pa*m3/s max. Ambient temperature range Operating: -25C to 55C Storage: -25C to 55C Material Aluminum (A5056) Flange-seal material Fluorocarbon rubber (Viton) Weight (packed state) Approx. 280 g Stainless steel (SUS304) Aluminum (A5056) Approx. 240 g 15 Features/Application Application-corresponding Models Label Detection * Built-in lens and high-power beam enable the reliable detection of labels through a mounting board. * These Fiber Units can be washed with hydrogen peroxide, making them ideal for the food industry. Applications Detecting labels Ratings/Characteristics E32-G14 Ambient tem-40C to 70C (no icing or condensation) perature range Fiber material Plastic 10 mm E32-G14 Degree of protection IP67 Type Features Through-beam Overview of Model Variations Shape, sensing distance (mm)* Slot sensor, no adjustment of optical axis required Screw mounting, side-view Model number 10 E32-G14 3,400 E32-T14 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Liquid-level Detection Operating Principle * Area sensing is possible with minimal influence from bubbles and drops of water (E32-A01/A02/D36T). Tube-mounting * For safety when disconnections occur, two models have been developed, a light ON model for liquid presTube Liquid Air ence and a light ON model for liquid absence (E32-A01/ A02). Tube-mounting model Liquid-contact model Liquid-contact model Air No liquid present E32-D36T E32-D82F1 Liquid present Liquid The presence/absence of liquid is detected using the refractive properties of light. More specifically, it utilizes the fact that the difference in refractive index between the air and the tip/tube is larger than the difference between the liquid and the tip/tube. Overview of Model Variations Liquidcontact Tube-mounting Type Features Shape, sensing distance (mm)* Model number Light ON when liquid is present (ideal for checking lower limits) Applicable tube: Transparent tube with a diameter of 3.2, 6.4, or 9.5 mm and a rec- E32-A01 ommended wall thickness of 1 mm Light ON when liquid is absent (ideal for checking for overflow) Applicable tube: Transparent tube with a diameter in the range 6 to 13 mm and a recommended wall thickness of 1 mm No restriction on tube diameter, resistant to bubbles and drops of water Applicable tube: Transparent tube (no reE32-D36T striction on diameter) Heat-resistant up to 200C, shape preLiquid-contact model vents liquid buildup E32-A02 E32-D82F1 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 16 iiAEEAEvEaEPA[EVEaEi Application-corresponding Models Glass-substrate Alignment * There is little variation of detection position within the Engineering Data (E32-A07/A08/L16) detection range (0.1 mm max.) Detection-Position Characteristic (Typical Examples) * The different model variations can handle a variety of Sensing object: Raw glass E32-A07 (t = 0.7 mm, rounded edge) sensing distances and temperature conditions. 25 Sensing distance, Y (mm) X Y 20 10 E32-A08 5 0 E32-L16 E32-L16 15 2.5 3.0 3.5 4.5 5.0 6.0 Detection position, X (mm) Overview of Model Variations Type Features Shape, sensing distance (mm)* Limited-reflective 0 to 15 mm, wide-range sensing 0 to 15 E32-L16 10 to 20 E32-A08 15 to 25 E32-A07E1 E32-A07E2 5 to 18 E32-L66 Long-distance sensing Heat-resistant up to 300C Model number *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Glass-substrate Mapping 200 Rounded edge 150 Rate of change of digital light-intensity value (%) Digital light-intensity value * These models can reliably detect thin glass-substrate Engineering Data (E32-A09) end faces (t = 0.5 mm, beveled edge). Digital Light-intensity Value vs Sensing Distance Angle Characteristics in Left and Right Directions (Typical Examples) (Typical Example) * Using a large-diameter lens makes it possible to cope 300 100 250 with tilting of the glass substrates. Beveled edge 100 50 0 0 10 20 30 40 50 60 70 75 50 25 0 -10 -8 Sensing distance, X (mm) Sensing object: Raw glass (t = 0.5 mm, beveled/rounded edge) X mm -6 -4 -2 0 2 4 6 8 10 Angle, (o) Sensing object: Raw glass (t = 0.5 mm, rounded edge) 25 mm + - Emission side Reception side E32-A09 Type Features Limited-reflective Overview of Model Variations Large-diameter lens ensures resistance to tilting Shape, sensing distance (mm)* E32-A09 15 to 38 (center: 25) Heat-resistant up to 150C Heat-resistant up to 300C Model number E32-A09H 20 to 30 (center: 25) E32-A09H2 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). 17 Features/Applications Application-corresponding Models Wafer Mapping * Wafers are reliable detected with an ultrafine beam. * The optical axis is adjusted before delivery to allow easy installation. E32-A03 Features Optical axis adjusted before delivery so that displacement is typically within 0.1. Direction of rotation Vertical rotation Engineering Data Rate of change of digital light-intensity value (%) E32-A03-1 180 8-inch Wafer Mapping Characteristic (Typical Examples) Wafer piles can also be detected 160 140 120 100 80 170 mm 60 40 20 0 -10 For 2 wafers X Fiber For 1 wafer 2-wafer pile -9 -8 -7 -6 -5 -4 -3 -2 -1 Distance moved, X (mm) Fiber 6.35 mm 0 1 2 3 Silicon wafer (t = 0.75 mm) 4 Overview of Model Variations Type Features Shape, sensing distance (mm)* Through-beam Opening angle: 1.5 Model number E32-A03 890 With mounting flange E32-A03-1 Opening angle: 3 ultraslim E32-A04 340 With mounting flange E32-A04-1 *The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode). Responding to the Increasing Size of Installations Impressive long-distance sensing capacity (up to 7 m) MSR function for eliminating light not reflected from the reflector Size-adjustable line and area beams Glass detection through a view port Long-distance and E3C-LDA-series Photoelectric Sensors with Separate Digital Amplifiers (Laser Type) High-precision Sensing and Simple Installation Parallel light kept at a constant diameter of 2 mm for up to 1 m Adjustment function for adjusting the optical axis 18 Wafer Ejection inspection Ordering Information Through-beam Fiber Units High-resolution mode Standard mode High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) ( Type Appearance (mm) *2 Sensing distance (mm) Standard object Min. bend(min. sensing ing radius object) (mm) *1 (mm) Features Model number M4 screw E32-T11R 3-dia. cylinder E32-T12R Flat shape E32-T15XR M4 screw, with sleeve E32-TC200BR E32-TC200B4R 3-dia. cylinder, side-view E32-T14LR Flat shape, side-view E32-T15YR Flat shape, flat-view E32-T15ZR M3 screw (small) E32-T21R 2-dia. cylinder (small) E32-T22R M4 3 dia. 530 350 (140) Standard size 15 x 8 x 3 700 90 (40) ( ): E32-TC200B4R 1 dia. (0.005 dia.) M4 1.2 dia. Min. bending radius of sleeve: 5 3 dia. Flexible (new standard) Standard models 15 x 8 x 3 270 210 130 (50) 15 x 8 x 3 R M3 R1 2 dia. 1.5 dia. 1.5-dia. cylinder E32-T222R (small) 160 130 75 (30) Small size 12 x 7 x 2 0.5 dia. (0.005 dia.) 90 (40) ( ): E32-TC200F4R M3 0.9 dia. Min. bending radius of sleeve: 5 1 dia. 12 x 7 x 2 12 x 7 x 2 60 50 25 (10) Flat shape (small) E32-T25XR M3 screw (small), with sleeve E32-TC200FR E32-TC200F4R 1-dia. cylinder (small), side-view E32-T24R Flat shape (small), side-view E32-T25YR Flat shape (small), flat-view E32-T25ZR *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. 19 Through-beam Fiber Units High-resolution mode Standard mode ( Type Appearance (mm) *2 High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) Sensing distance (mm) Standard object Min. bend(min. sensing ing radius object) (mm) *1 (mm) Features Model number M4 screw E32-TC200 3-dia. cylinder E32-T12 Flat shape E32-T15X M4 M4 1,000 760 500 (200) Standard size 15 x 8 x 3 90 (40) ( ): E32-TC200B4R 1.2 dia. Min. bending radius of sleeve: 5 1 dia. (0.005 dia.) 3 dia. 15 x 8 x 3 460 300 (120) R25 3-dia. cylinder, E32-T14L side-view 600 15 x 8 x 3 Standard Standard models M4 screw, with E32-TC200B sleeve E32-TC200B4 M4 680 450 (180) M3 Flat shape, side-view E32-T15Y Flat shape, flat-view E32-T15Z 900 E32-TC200A M3 screw (small) E32-TC200E M3 2 dia. Small size 1.5 dia. 270 220 125 (50) 12 x 7 x 2 0.5 dia. (0.005 dia.) 90 (40) ( ): E32-TC200F4R M3 0.9 dia. Min. bending radius of sleeve: 5 1 dia. 12 x 7 x 2 12 x 7 x 2 160 130 75 (30) R10 2-dia. cylinder (small) E32-T22 1.5-dia. cylinder (small) E32-T222 Flat shape (small) E32-T25X M3 screw (small), with sleeve E32-TC200F E32-TC200F4 1-dia. cylinder (small), sideview E32-T24 Flat shape (small), sideview E32-T25Y Flat shape (small), flat-view E32-T25Z *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. 20 Through-beam Fiber Units Appearance (mm) *2 Break-resistant Sensing distance (mm) Features Model number M4 screw E32-T11 3-dia. cylinder E32-T12B Flat shape E32-T15XB M3 screw (small) E32-T21 2-dia. cylinder (small) E32-T221B 1.5-dia. cylinder (small) E32-T22B Flat shape (small) E32-T25XB M4 screw, fluorine coating E32-T11U Large built-in lens, M14 screw E32-T17L M4 screw E32-TC200+ E39-F1 M4 screw, flexible fiber E32-T11R+ E39-F1 M4 680 450 (180) 3 dia. 900 1 dia (0.005 dia.) 15 x 8 x 3 B M3 Small size Standard models Standard size Type Min. Standard object bending (min. sensing radius object) (mm) *1 (mm) 2 dia. R4 240 200 110 (45) 0.5 dia (0.005 dia.) 1.5 dia. Coating 12 x 7 x 2 M4 M14 180 150 85 (35) 680 450 (180) 900 1 dia. (0.005 dia.) U R4 20,000*3 20,000*3 10,000 (4,000) 10 dia. R25 Long-distance, high-power Special-beam models 4,000*4 4,000*4 2,600 (1,500) M4 4,000*4 3,700 2,400 (970) R 4 dia. (0.1 dia.) 4,000*4 3,600 2,300 (930) R1 B R4 4,000*4 3,400 2,250 (900) R25 M4 1,700 1,330 870 (350) M4 screw, E32-T11+ break-resistant E39-F1 Screw mounting, side-view E32-T14 M4 screw E32-T11L 3-dia. cylinder E32-T12L 1.4 dia. (0.01 dia.) 3 dia. *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. *3. The optical fiber is 10 m long on each side, so the sensing distance is 20,000 mm. *4. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. 21 Through-beam Fiber Units High-resolution mode Standard mode High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) ( Type Appearance (mm) *2 Sensing distance (mm) Long-distance, high-power 500 (180) 910 800 520 400 250 (100) M4 660 430 (160) M3 Standard object Min. bend(min. sensing ing radius object) (mm)*1 (mm) 3 dia. (0.1 dia.) M4 screw, side-view E32-T11L+ E39-F2 R M4 screw, side-view, flexible fiber E32-T11R+ E39-F2 M4 screw, side-view, break-resistant E32-T11+ E39-F2 M3 screw (small) E32-T21L B R4 540 440 250 (100) 0.9 dia. (0.005 dia.) R10 0.5 dia. (0.005 dia.) R 2-dia. cylinder E32-T22L (small) Ultracompact, thin-sleeve 1 dia. 3 dia. 0.5 dia. Sleeve cannot be bent. 3 dia. 0.25 dia. Sleeve cannot be bent. 3 dia. 0.22 dia. Sleeve cannot be bent. Fine-beam Special-beam models 2 dia. 3 dia. 160 130 75 (30) Model number R25 R1 820 Features 1-dia. cylinder, E32-T223R flexible fiber R1 53 44 25 (10) 0.5-dia. sleeve; 0.25dia. opening 0.25 dia. (0.005 dia.) E32-T33-S5 0.25-dia. sleeve, 0.125- E32-T333-S5 dia. opening 12 10 6 (4) 0.125 dia. (0.005 dia.) 6 5 3 (2) 0.1 dia. (0.005 dia.) 0.22-dia. sleeve, 0.1dia. opening 1.7 dia. (0.1 dia.) 3-dia. cylinder E32-T22S 2,500 1,900 1,250 (500) R10 E32-T334-S5 R10 3.5 dia. 1,750 1,300 870 (350) 1,100 840 560 (220) R R1 11 Area-sensing 1,500 1,100 750 (300) 980 750 480 (190) 11 1,300 1,000 650 (260) 3.5-dia. cylinE32-T24S der, side-view 2 dia. (0.1 dia.) E32-T16PR Area width: 11 mm R10 E32-T16P (0.2 dia.) *3 R R1 R10 Area width: 11 mm; sideview E32-T16JR E32-T16J *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. *3. This is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (The sensing object is stationary.) 22 Through-beam Fiber Units Appearance (mm) *2 Sensing distance (mm) 1,700 1,300 850 (340) 30 Area-sensing Special-beam models Type 610 350 (140) 750 1,000 760 500 (200) M4 300 230 150 (60) 2 dia. 360 280 180 (70) M4 Heat-resistant (0.3 dia.) *3 M4 450 300 (120) 600 200C*6 R1 R25 1.5 dia. (0.1 dia.) R35 1 dia. (0.005 dia.) R10 3 dia. (0.1 dia.) R25 350C*6 M4 450 300 (120) 600 Chemical-resistant 7.2 dia. 5 dia. 6 dia. 500 400 250 (100) R4 Area width: 10 mm; long distance E32-T16 Heat-resistant up to 150C; sideE32-T54 view Heat-resistant up E32-T81R-S to 200C Heat-resistant up to 200C; sideview Heat-resistant up to 200C, long distance Heat-resistant up to 200C; Lshaped; long distance E32-T61-S+ E39-F2 E32-T61-S+ E39-F1 E32-T84S-S Fluororesin cover, E32-T11F round head 4 dia. (0.1 dia.) Fluororesin cover, E32-T12F long distance 3 dia. (0.1 dia.) R40 1,800 4 dia. (0.1 dia.) 1,400 900 (350) 920 700 460 (190) E32-T16W Heat-resistant up E32-T61-S to 350C 4,000*7 3,000 2,000 (800) 5 dia. 5 dia. 1 dia. (0.005 dia.) 2,500 2,000 1,300 (520) E32-T16WR Area width: 30 mm Heat-resistant up E32-T51 to 150C 1,750 1.7 dia. 1,300 (0.1 dia) 870 (350) 3 dia. Model number Multi-point detecE32-M21 tion (4-head) 2 dia. (0.1 dia) 4,000*7 4 dia. (0.1 dia.) 3,400 2,200 (900) M4 Features R10 3,700 (0.6 dia.) *4 2,800 1,850 (740) M3 Environment-resistive models R 2,300 1,800 1,150 (450) 10 150C*5 Min. Standard object (min. sensing bending radius object) (mm)*1 (mm) 1 dia. (0.005 dia.) R10 Fluororesin cover, E32-T14F side-view Fluororesin cover, heat-resistant up E32-T51F to 150C *5 Fluororesin cover, heat-resistant up E32-T81F-S to 200C *6 *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. *3. This is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (The sensing object is stationary.) *4. This is the value for which detection is possible within the sensing area, with the sensing distance set to give a digital value of 1,000. (The sensing object is stationary.) *5. For continuous operation, use the products within a temperature range of-40C to 130C. *6. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details. *7. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. 23 Through-beam Fiber Units High-resolution mode Standard mode ( Type Appearance (mm) High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) Sensing distance (mm) Min. bending radius (mm) 1.2 dia. (0.01 dia.) 1,350 1,000 680 (260) Vacuum-resistant Environment-resistive models 260 200 130 (50) Standard object (min. sensing object) (mm) * 4 dia. (0.1 dia.) R30 210 130 100 (35) 1.2 dia. (0.01 dia.) 500 330 (180) 480 320 (130) 660 630 4 dia. (0.1 dia.) 2 dia. (0.1 dia.) R25 Features Model number M4 screw, heatresistant up to 120C M4 screw, heatresistant up to 120C, long distance L-shaped, heatresistant up to 120C L-shaped, heatresistant up to 120C, long distance L-shaped, heatresistant up to 200C, long distance E32-T51V 1M E32-T51V 1M+ E39-F1V E32-T54V 1M E32-T54V 1M+ E39-F1V E32-T84SV 1M * The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. Flanges Lens Units Appearance (mm) Type 4-channel flange Model number Appearance (mm) Type E39-F1V E32-VF4 Quantity Remarks 2 Long-distance Lens Unit Can be used for the E32T51V and the E32-T54V. Quantity Remarks 2 Can be used for the E32T54V. Mounting Brackets 1-channel flange E32-VF1 Fiber Units for Atmospheric-pressure Side Appearance (mm) Type Amplifier-Flange Connection Fiber * 24 Indicates models that allow free cutting. Appearance (mm) Type E39-L54V Model number E32-T10V 2M Ordering Information Fiber Units with Reflective Sensors High-resolution mode Standard mode ( Type Appearance (mm) *3 High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) Sensing distance (mm) *1 (Min. sensing Min. bending object) (mm) *2 radius (mm) Features Model number M6 screw E32-D11R 3-dia. cylinder E32-D12R Flat shape E32-D15XR M6 300 170 120 (50) 15 x 10 x 3 M6 screw, with sleeve Sleeve cannot be bent. M6 2.5 dia. 6 dia. 80 45 30 (14) 15 x 10 x 3 Flexible (new standard) Standard models Standard size 3 dia. 70 40 26 (12) 15 x 10 x 3 (0.005 dia.) M3 Small size 3 dia. 50 30 20 (8) 12 x 8 x 3 12 x 8 x 2 12 x 8 x 2 6-dia. cylinder, side-view E32-D14LR Flat shape, side-view E32-D15YR Flat shape, flat-view E32-D15ZR M4 screw (small) E32-D211R M3 screw (small) E32-D21R 3-dia. cylinder (small) E32-D22R Flat panel (small) E32-D25XR M3 screw (small), with sleeve Min. bending M3 1.2 dia. radius of sleeve: 5 2 dia. R R1 M4 26 15 10 (4) 14 8 5 (2) E32-DC200BR E32-DC200B4R E32-DC200FR E32-DC200F4R 2-dia. cylinder (small), side-view E32-D24R Flat shape (small), side-view E32-D25YR Flat shape (small), flat-view E32-D25ZR *1. The sensing distances are for white paper. *2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. Indicates models that allow free cutting. 25 Fiber Units with Reflective Sensors High-resolution mode Standard mode ( Type Appearance (mm) *3 High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) Sensing distance (mm) *1 M6 3 dia. 400 230 160 (70) 200 110 80 (36) 170 100 65 (30) Standard size Standard 15 x 10 x 3 (0.005 dia.) M4 M3 130 80 50 (22) 3 dia. Small size 12 x 8 x 2 ( ): E32-DC200F4 12 x 8 x 2 R10 90 (40) M3 1.2 dia. 2 dia. 12 x 8 x 2 Model number M6 screw E32-DC200 3-dia. cylinder E32-D12 Flat shape E32-D15X M6 screw, with sleeve E32-DC200B E32-DC200B4 6-dia. cylinder, side-view E32-D14L Flat shape, side-view E32-D15Y Flat shape, flat-view E32-D15Z M4 screw (small) E32-D211 M3 screw (small) E32-DC200E 3-dia. cylinder (small) E32-D22 Flat shape (small) E32-D25X M3 screw (small), with sleeve E32-DC200F E32-DC200F4 2-dia. cylinder (small), side-view E32-D24 Flat shape (small), side-view E32-D25Y Flat shape (small), flat-view E32-D25Z M6 2.5 dia. 15 x 10 x 3 Min. bending radius of sleeve: 5 Features 500 R25 6 dia. Standard models 300 200 (90) 90 (40) ( ): E32-DC200B4 Sleeve cannot be bent. 500 300 200 (90) 15 x 10 x 3 Min. (Min. sensing bending object) (mm) *2 radius (mm) 50 30 20 (8) 35 20 12 (6) *1. The sensing distances are for white paper. *2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. Indicates models that allow free cutting. 26 Fiber Units with Reflective Sensors Appearance (mm) *3 M6 Sensing distance (mm) *1 M4 170 120 (50) 110 70 45 (20) (0.005 dia.) Small size Coating Long-distance, high-power M6 screw E32-D11 Flat shape E32-D15XB M4 screw (small) E32-D21B M3 B 3-dia. cylinder (small) E32-D221B M3 screw (small) E32-D21 R4 3 dia. 12 x 8 x 2 50 30 20 (8) 1.5-dia. cylinder E32-D22B (small) M6 85 50 30 (15) 300 170 120 (50) 17.5 3 dia. 0.8 dia. Sleeve cannot be bent. U Flat shape (small) E32-D25XB M6 screw, fluorine coating E32-D11U Large built-in lens, screw mounting E32-D16 M6 screw E32-D11L M4 screw E32-D21L 3-dia. cylinder E32-D22L 0.8-dia. sleeve E32-D33 0.5-dia. sleeve E32-D331 R4 400 260 (110) M6 M4 (0.005 dia.) 40 to 1,000 40 to 700 40 to 450 (40 to 240) --- B R4 650 R25 210 130 80 (35) 3 dia. Ultracompact, thin-sleeve Model number 300 1.5 dia. Special-beam models Features 15 x 10 x 3 Break-resistant Standard models Standard size Type Min. (Min. sensing bending object) (mm) *2 radius (mm) R10 (0.005 dia.) 25 16 10 (4) R4 2 dia. 0.5 dia. Sleeve cannot be bent. 5 3 2 (0.8) *1. The sensing distances are for white paper. *2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. Indicates models that allow free cutting. 27 Fiber Units with Reflective Sensors High-resolution mode Standard mode High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) ( Type Appearance (mm) *3 Sensing distance (mm) *1 Min. (Min. sensing bending object) (mm) *2 radius (mm) 250 150 100 (45) M6 300 200 (90) 3 dia. M3 R R4 Coaxial, small-spot Model number E32-CC200R M6 screw 500 E32-CC200 250 150 100 (45) 120 75 50 (22) 2 dia. Special-beam models Features 6 to 15 mm; spot diameter: 0.1 to 0.6 mm Spot diameter of 0.5 to 1 mm at distances in the range 6 to 15 mm 3-dia. cylinder E32-D32L M3 screw (small) E32-C31 2-dia. cylinder (small) E32-D32 Small spot (variable) (0.005 dia.) R25 E32-C42+ E39-F3A E32-D32+ E39-F3A E32-C41+ E39-F3A-5 Spot diameter of 0.1 mm at 7 mm Small spot Spot diameter of 0.5 mm at 7 mm E32-C31+ E39-F3A-5 Spot diameter of 0.2 mm at 17 mm E32-C41+ E39-F3B Long distance, small spot Spot diameter of 0.5 mm at 17 mm Retroreflective Area-sensing 4-dia. spot M6 E39-R3 Reflector E39-R3 Reflector Long-distance E32-C31+ sensing, parallel E39-F3C light Spot diameter of 4 mm max. at distances in the range 0 to 20 mm 250 150 100 (45) E32-C31+ E39-F3B (0.005 dia.) B Beam width: 11 mm E32-D36P1 E32-R21+ E39-R3 (Attached) R4 10 to 250 10 to 250 10 to 250 (10 to 250) 150 to 1,500 150 to 1,500 150 to 1,500 (150 to 1,500) (0.1 dia.) R10 M6 screw (0.2 dia.) R25 E32-R16+ Screw mounting, E39-R1 long distance (Attached) *1. The sensing distances are for white paper. *2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. Indicates models that allow free cutting. 28 Fiber Units with Reflective Sensors High-resolution mode Standard mode ( Type Appearance (mm) *3 High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) Sensing distance (mm) *1 Min. (Min. sensing bending object) (mm) *2 radius (mm) R25 Ultracompact, flat-view E32-L24S Heat resistant up to 105C *4, top-view E32-L24L 5.4 to 9 (center: 7.2) 5.4 to 9 (center: 7.2) 5.4 to 9 (5.4 to 9) (center: 7.2) Heat resistant up to 105C *4, top-view E32-L25L 4 to 10 4 to 10 4 to 10 (4 to 10) Heat resistant up to 200C, flat- E32-L86 view (0.005 dia.) R10 R25 Wide-range sensing, flatview E32-L16 R35 Heat resistant up to 150C E32-D51 R10 Heat resistant up to 200C E32-D81R-S E32-D81R Heat resistant up to 350C E32-D61-S E32-D61 Heat resistant up to 400C, with sleeve E32-D73-S E32-D73 0 to 15 0 to 15 0 to 12 (0 to 12) Heat-resistant 200C*6 M6 350C*6 400 230 160 (72) 150 90 60 (27) (0.005 dia.) M6 R25 400C*6 Chemical-resistant Environment-resistive models M6 M4 1.25 dia. Min. bending radius of sleeve: 10 6 dia. 100 60 40 (18) 160 95 65 (30) Fluororesin covE32-D12F er, long distance (0.005 dia.) 7 dia. Small level differences, high E32-L25 power, side-view E32-L25A 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (2 to 6) (center: 4) 150C*5 Model number Small level differences, topview 0 to 4 0 to 4 0 to 4 (0 to 4) Convergent-reflective Special-beam models 3.3 3.3 3.3 (3.3) Features 70 40 30 (10) R40 Fluororesin covE32-D14F er, side-view *1. The sensing distances are for white paper. *2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. Indicates models that allow free cutting. *4. For continuous operation, use the products within a temperature range of -40C to 90C. *5. For continuous operation, use the products within a temperature range of -40C to 130C. *6. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details. *7. Confirm applicable Amplifier Units before placing an order. (Refer to Precautions for Correct Use.) 29 Ordering Information Application-corresponding Fiber Units High-resolution mode Standard mode High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) ( Label-detection Type Appearance (mm) *2 Sensing distance (mm) 10 10 10 (10) Standard object Min. bend(min. sensing ing radius object) (mm)*1 (mm) 4 dia. (0.1 dia.) R25 4,500 3,400 2,250 (900) Applicable tube: Transparent tube with a diameter in the range 8 to 10 mm and a recommended wall thickness of 1 mm R10 Liquid-level detection Applicable tube: Transparent tube with a diameter of 3.2, 6.4, or 9.5 mm and a recommended wall thickness of 1 mm Glass-substrate-alignment R4 Applicable tube: Transparent tube with a diameter in the range 6 to 13 mm and a recommended wall thickness of 1 mm Liquid-contact models Glass-substrate-mapping Application-corresponding models Applicable tube: Transparent tube (no restriction on diameter) R40 0 to 15 0 to 15 0 to 12 (0 to 12) 10 to 20 10 to 20 10 to 20 (-) 15 to 25 15 to 25 10 to 20 (-) 20 to 30 (center: 25) 20 to 30 (center: 25) 20 to 30 (center: 25) (-) Model number Slot sensor (no adjustment of optical E32-G14 axis required) Screw mounting, side-view E32-T14 Compact E32-L25T No restriction on tube diameter, resistant to bubbles and drops of water E32-D36T Light ON when fluid is present, resistant E32-A01 to bubbles and drops of water Light ON when fluid is not present, resisE32-A02 tant to bubbles and drops of water Heat resistant up to 200C, fluororesin cover E32-D82F1 E32-D82F2 E32-L16 Soda glass with reflection factor of 7% 5 to 18 5 to 18 5 to 16 (-) 15 to 38 (center: 25) 15 to 38 (center: 25) 15 to 38 (center: 25) (-) Features Edge of soda glass with reflection factor of 7% (t = 0.5 mm, rounded edge) R25 Variation of detection position within E32-A08 the detection range: 0.2 mm E32-A07E1 *6 E32-A07E2 *6 R25 Heat resistant up to 300C *4, *5 E32-L66 R25 Resistant to tilting E32-A09 R35 Heat resistant up to 150C *3 E32-A09H R25 Heat resistant up to 300C *4, *5 E32-A09H2 *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. *3. *4. *5. *6. 30 For continuous operation, use the products within a temperature range of -40C to 130C. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details. These values are based on the assumption that there are no repeated sudden changes in temperature. The characteristics for sensing object incline are different between the Attachments with model numbers ending in "E1" and "E2." Refer to page 52 for installation precautions. Application-corresponding Fiber Units Type Appearance (mm) *2 Sensing distance (mm) Standard object Min. bend(min. sensing ing radius object) (mm)*1 (mm) R 1,150 890 600 (250) 3 dia. Wafer-mapping Application-corresponding models 3 dia. R1 2 dia. (0.1 dia.) R10 2 dia. 460 340 225 (100) Opening angle: 1.5; optical axis adjusted E32-A03 before delivery Long distance; opening angle: 4 2 dia. 1.2 dia. (0.1 dia.) Model number Opening angle: 1.5; with mounting flange; optical axis E32-A03-1 adjusted before delivery 1,750 1,300 870 (350) 3.5 dia. Features E32-T24S Ultraslim (t = 2 mm); opening angle: 3; E32-A04 optical axis adjusted before delivery Ultraslim (t = 2 mm); opening angle: 3; with mounting E32-A04-1 flange; optical axis adjusted before delivery *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. Indicates models that allow free cutting. 31 Accessories Lens Units *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Sensing distance (mm) Long-distance Lens Units Side-view Units Reflection Units Through-beam Lens Units Type Appearance Applicable Fiber Units Superhighspeed mode Standard object (min. sensing object) (mm) *1 Features Model number 4,000*2 3,200 2,100 840 E32-TC200 4,000*2 4,000*2 2,600 1,500 E32-T11R 4,000*2 3,700 2,400 970 E32-T11 4,000*2 3,600 2,300 E32-T11U 4,000*2 3,600 2,300 2,650 2,100 1,300 Long-distance sensing; opening angle: 5 to 930 4 dia. (0.1 dia.) E39-F1 40 (heat resistant up to 930 200C) 520 4,000*2 3,400 2,200 900 E32-T11L 910 800 500 180 E32-TC200 840 700 450 160 E32-T11R 520 400 250 100 E32-T11 820 660 430 E32-T11U 820 660 430 E32-T81R-S 360 280 180 70 E32-T61-S 600 450 300 120 E32-T81R-S E32-T61-S E32-T11L E32-TC200 E32-T11R E32-T11 E32-T11U E32-T81R-S E32-T61-S E32-D32 Small-spot Lens Units Highspeed mode E32-T11L E32-C42 Reflective Lens Units HighStandard resolution mode mode --- Side-view, space-saving 160 3 dia. (0.1 dia.) (heat resistant up to 200C) 160 --- Long distance reflection (heat E39-F3 resistant up to 200C) Spot diameter variable in the range 0.1 to 0.6 mm at distances in the range 6 to 15 mm Small spot Spot diameter variable in the range 0.5 to 1 mm at distances (variable) in the range 6 to 15 mm E32-C41 0.1-dia. spot at a distance of 7 mm E32-C31 0.5-dia. spot at a distance of 7 mm E32-C41 0.2-dia. spot at a distance of 17 mm E32-C31 0.5-dia. spot at a distance of 17 mm E32-C31 E32-C41 Spot diameter of 4 mm max. at distances in the range 0 to 20 mm E39-F2 Small spot E39-F3A E39-F3A-5 Long distance, E39-F3B small spot Long-distance sensing, paral- E39-F3C lel light *1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. 32 Accessories Protective Spiral Tube Appearance Application Fiber protection Applicable Fiber Units Tube length Model number M3-screw models E32-D21@ E32-DC200E E32-DC200F@ E32-C31 500 mm E39-F32A5 1m E39-F32A M3-screw models E32-T21@ (Except the E32-T21R.) E32-TC200E E32-TC200F@ 500 mm E39-F32B5 1m E39-F32B M4-screw models E32-T11@ E32-TC200 E32-TC200B@ E32-T51 500 mm E39-F32C5 1m E39-F32C M6-screw models E32-D11@ E32-DC200 E32-DC200B E32-CC200@ E32-D51 500 mm E39-F32D5 1m E39-F32D Note: Before using a Protective Spiral Tube, remove the protective tube that protects the area between the head and the optical fiber provided with some models. Other Accessories Appearance Application Name Applicable Fiber Units Remarks Model number Used to cut the fiber. Cutter Fiber Units that allow free cutting Provided with applicable Fiber Units. E39-F4 Attachments for inserting thin fibers into Amplifier Units Thin-fiber Attachments Fiber Units that allow free cutting and have a 1.0-dia. sheath * 2 per set * Provided with applicable Fiber Units. E39-F9 Fiber Units that allow free cutting and have a 2.2-dia. sheath --- E39-F10 Fiber Units that allow free cutting E39-F13: Used for Fiber Units with a 2.2dia. sheath. E39-F14: Used for Fiber Units with a 1.0dia. sheath. E39-F15: Used for Fiber Units with a sheath diameter between 1.0 and 2.2 mm. E39-F13 E39-F14 E39-F15 --- E39-F11 Used to extend fibers. Fiber Connectors Easy-to-use, onetouch relay connectors Used to bends in sleeves. Sleeve Bender E32-TC200B(4) E32-TC200F(4) E32-DC200F(4) 33 Ratings/Characteristics Fiber Units Standard models Type Flexible Item E32-T1@R E32-D1@R E32-T2@R E32-D2@R Standard Break-resistant Fluorine-coating Plastic (PVC coating) Plastic (fluororesin coating) Coaxial, small-spot Fine-beam (narrow vision field) Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Fiber material Plastic (PVC coating) Plastic (polyethylene coating) Degree of protection IEC standard: IP67 Special-beam models Type Item Long-distance, high-power All other models E32-D16 Ultracompact, ultrafine-sleeve Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Plastic (polyethylene Plastic (combination of PVC, polyethylene, Fiber material Plastic (PVC coating) coating) and polyolefin sheaths) Degree of protection IEC standard: IP67 IEC standard: IP40 IEC standard: IP67 Area-sensing Item E32-D36P1 E32-T16 All other models Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Plastic (PVC coating) Retroreflective E32-T16W(R) -25C to 55C E32-R21 E32-R16 -40C to 70C -25C to 55C Plastic (polyethylene Plastic (PVC coating) Plastic (polyethylene coating) coating) Degree of protection IEC standard: IP50 (IP67 for E32-T16) IEC standard: IP67 Convergent-reflective Item All other models Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 E32-L25L E32-L24L -40C to 105C *2 Plastic (polyethylene coating) Degree of protection IEC standard: IP50 (IP40 for E32-L24S, E32-L16, and E32-L86) *1. There must be no icing or condensation within the range specified for the ambient operating temperature. *2. For continuous operation, use the products within a temperature range of -40C to 90C. *3. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details. 34 IEC standard: IP66 Special-beam models Type Fiber material IEC standard: IP50 Special-beam models Type Fiber material Plastic (PVC coating) E32-L86 -40C to 200C *3 Glass (SUS spiral coating) Fiber Units Environment-resistive models Type Heat-resistant Item E32-T5@ E32-D5@ Ambient operating -40C to 150C *4 temperature range *1 Ambient humidity 35% to 85% range *1 Plastic Fiber material (fluororesin coating) E32-T8@R-S E32-D8@R-S E32-T6@-S E32-D6@-S E32-T84S-S -40C to 200C *3 Glass (fluororesin coating) -60C to 350C *3 E32-D73-S -40C to 400C *3 Glass (SUS spiral coating) Degree of protection IEC standard: IP67 Environment-resistive models Type Item Chemical-resistant All other models Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Fiber material E32-T51F Vacuum-resistant E32-T81F-S -40C to 150C *4 Plastic (fluororesin coating) All other models -40C to 200C *3 -25C to 120C -25C to 200C Glass (fluororesin coating) Glass (fluororesin coating) Glass (SUS spiral coating) Degree of protection IEC standard: IP67 --Application-corresponding models Type Liquid-level detection Item Label-detection All other models E32-A01 E32-A02 Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Fiber material Other Wafer-mapping E32-D82F -40C to 200C *3 -40C to 70C (Fluororesin coating) Plastic (polyethylene coating) IEC standard: IP50 IEC standard: IP68 IEC standard: IP50 Repeat accuracy: 1 mm max. Repeat accuracy: 0.5 mm max. Plastic (fluororesin coating) Plastic (polyethylene coating) Degree of protection IEC standard: IP67 Application-corresponding models Type Item 32-T84SV Glass-substrate-alignment All other models E32-L66 Ambient operating -40C to 70C 0C to 300C *3, *5 temperature range *1 Ambient humidity 35% to 85% range *1 Glass Plastic Fiber material (polyethylene coating) (SUS spiral coating) Glass-substrate-mapping E32-A09 -40C to 70C E32-A09H -40C to 150C *4 Plastic Plastic (polyethylene coating) (fluororesin coating) E32-A09H2 -40C to 300C *3 Glass (SUS spiral coating) Degree of protection IEC standard: IP40 *1. *2. *3. *4. *5. There must be no icing or condensation within the range specified for the ambient operating temperature. For continuous operation, use the products within a temperature range of -40C to 90C. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details. For continuous operation, use the products within a temperature range of -40C to 130C. These values are based on the assumption that there are no repeated sudden changes in temperature. 35 Dimensions (Unit: mm) Through-beam Fiber Units Through-beam models consist of two parts: an emitter and a receiver. Standard/Flexible Models Indicates models that allow free cutting. E32-TC200E E32-TC200 E32-T11R 1 dia. M2.6 x 0.45 3.2 Two hexagonal nuts Two toothed washers Sensing head: M4 x 0.7* Optical fiber: 2.2 dia. 3 2.4 7 14 Two hexagonal nuts Two toothed washers Sensing head: M3 x 0.5* Optical fiber: 1 dia. 0.5 dia. 2.5 2,000 1.8 *Material: Brass/nickel plating Fiber Attachment (E39-F9) 2,000 11 5.5 25 10 *Material: Brass/nickel plating E32-T22 E32-T22R E32-TC200A E32-T21R Two hexagonal nuts Two toothed washers Sensing head: M3 x 0.5*2 Optical fiber: 2.2 dia. 1 dia.*1 1.8 5.5 Heat-shrinkable tube 0.5 dia. 2 dia. Sensing head* 1.4 dia. Optical fiber: 1 dia. 3 dia. 17 2,000 9.5 13.5 12 22 *1. E32-T21R: 0.5 dia. *2. Material: Brass/nickel plating 25 10 Fiber Attachment (E39-F9) 2,000 *Material: Stainless steel (SUS303) E32-T222 E32-T222R E32-T12 E32-T12R 2.4 dia. Sensing head: 3 dia.* 1 dia. Optical fiber: 2.2 dia. 25 Sensing head* 0.5 dia. 10 Optical fiber: 1 dia. 11 3 (14) 1.5 dia. 2,000 Fiber Attachment (E39-F9) *Material: Brass/nickel plating 10 2,000 *Material: Brass/nickel plating E32-T25X E32-T25XR E32-T15X E32-T15XR Sensing head* 2,000 15 Optical fiber: Two, 2.2 dia. Sensing surface 1 dia. 3 8 1.5 7 1 2.5 *Material: Aluminum 25 *Material: Aluminum Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 8 4 pcs) included Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 8 4 pcs) included E32-TC200B (B4) E32-TC200BR (B4R) E32-TC200(F4) E32-TC200FR(F4R) Two hexagonal nuts Two toothed washers Sensing head: M4 x 0.7 (coarse thread) *2 Stainlesssteel tube 1 dia. 1.2 dia. max. (SUS304) 90 (40)*1 11 2.5 2,000 25 10 Fiber Attachment (E39-F9) 1.8 90 (40)*1 5.5 *1. ( ): E32-TC200B4 *2. Material: Brass/nickel plating E32-T14L E32-T14LR Two hexagonal nuts Two toothed washers Sensing head: M3 x 0.5 *2 Optical fiber: 1 dia. Stainless0.5 dia. 0.9 dia. steel tube (SUS304) max. Optical fiber: 2.2 dia. 2.4 3.2 11 2,000 *1. ( ): E32-TC200F4 *2. Material: Brass/nickel plating E32-T24 E32-T24R Sensing head: 3 dia.* Heat-shrinkable 45 tube Fiber Attachment (E39-F9) Stainless-steel 25 Heat-shrinkable tube tube: 1 dia. Sensing head: 10 2 dia.* 1.4 dia. Optical fiber: 1 dia. 45 Optical fiber: 2.2 dia. 2.8 1.5 1 1.5 30 35 12 2,000 1 0.5 1.5 15 15 35 Sensing surface 36 2,000 Optical fiber: 1 dia. Fiber Attachment (E39-F9) 5 4.5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides 3 dia. Sensing head* 2.5 7.5 5 7 12 Sensing surface: 0.5 2 *Material: Stainless steel (SUS304) 12 2,000 *Material: Stainless steel (SUS304) Through-beam Fiber Units Standard/Flexible Models E32-T15Y E32-T15YR 4 E32-T25Y E32-T25YR Sensing head* 3 Sensing surface 1.5 Sensing surface 2,000 15 2,000 12 1 8 25 Optical fiber: 1 dia. 7 Optical fiber: Two, 2.2 dia. 7.5 5 2.5 15 Sensing surface 1.5 4 Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 x 8 4 pcs) included E32-T25Z E32-T25ZR 2,000 Sensing head* 2 1 8 2.5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides 12 Sensing surface 2,000 Sensing head* 3 25 Optical fiber: 1 dia. 7 Optical fiber: 2.2. dia. 7.5 5 2.5 *Material: Aluminum Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 x 8 4 pcs) included E32-T15Z E32-T15ZR Fiber Attachment (E39-F9) 5 4.5 2.5 *Material: Aluminum Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides 3 3 Sensing head* 2 *Material: Aluminum Fiber Attachment (E39-F9) 5 4.5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 x 8 4 pcs) included *Material: Aluminum Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 x 8 4 pcs) included Break-resistant/Coated Models E32-T11 E32-T11U E32-T21 Sensing head: Two hexagonal nuts M4 x 0.7* Two toothed washers Sixteen, 0.265 dia. Protective tube M2.6 x 0.45 3.2 2.4 3.3 15 1.8 2.5 (14) 7 Sensing head: Two hexagonal nuts M3 x 0.5* Two toothed washers Four, 0.25 dia. Protective tube Optical fiber: 1 dia. Optical fiber: 2.2 dia. 2,000 15 Fiber Attachment (E39-F9) 2,000 *Material: Brass/nickel plating 11 5.5 25 10 *Material: Brass/nickel plating E32-T221B E32-T12B Sixteen, 0.265 dia. 2.4 dia. Sensing head: 3 dia.* Heat-shrinkable tube Optical fiber: 1 dia. Optical fiber: 2.2 dia. 25 Four, 0.25 dia. 2 dia. Sensing head* 1.4 dia. 3 11 (14) 17 2,000 12 Fiber Attachment (E39-F9) 2,000 22 *Material: Brass/nickel plating 10 *Material: Stainless steel (SUS303) E32-T22B 25 Four, 0.25 dia. Sensing head* Optical fiber: 1 dia. 1.5 dia. 10 Fiber Attachment (E39-F9) 10 2,000 *Material: Brass/nickel plating E32-T15XB E32-T25XB Sensing head* Sensing surface: 15 Sixteen, 0.265 dia. 3 8 1.5 2,000 Optical fiber: 2.2 dia. Sensing surface: Four, 0.25 dia. 2 7 1 2.5 7.5 5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *Material: Aluminum Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 x 8 4 pcs) included 2,000 12 Sensing head* 2.5 5 4.5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides Optical fiber: 1 dia. 25 Fiber Attachment (E39-F9) *Material: Aluminum Note: 1. Set of two symmetrical parts. 2. Mounting screws (countersunk screw M2 x 8 4 pcs) included 37 Through-beam Fiber Units Long-distance/High-power Models E32-T17L Sensing head: M14 x 1* Indicates models that allow free cutting. E32-T14 Two hexagonal nuts Lens: 10 dia. (PMMA) 8 7.6 Optical axis R3.5 5 19 42 Optical fiber: 2.2 dia. 100.2 2.5 10,000 Two, 3.2 dia. 7 8 10.5 23 9.2 *Material: ABS E32-T11L Heat-resistant ABS Nitrile rubber Lens (PMMA) 4.4 dia. 8.2 Optical fiber: 2.2. dia. 16 11.2 2,000 E32-T12L 1.4 dia. M2.6 x 0.45 Two hexagonal nuts Two toothed washers Sensing head: M4 x 0.7* 2.4 dia. Sensing head: 3 dia.* 1.4 dia. 3 3.2 3 11 (14) 11 (14) 7 Optical fiber: 2.2. dia. Optical fiber: 2.2. dia. 2,000 *Material: Brass/nickel plating 2,000 *Material: Brass/nickel plating E32-T21L E32-T22L Two hexagonal nuts Two toothed washers Sensing head: M3 x 0.5* Optical fiber: 1 dia. 0.9 dia. 25 0.9 dia. 10 1.8 dia. Sensing head: 2 dia.* Heat-shrinkable tube Optical fiber: 1 dia. (2) (1.7) 2.5 11 5.5 17 22 Fiber Attachment (E39-F9) 1.8 2,000 25 10 Fiber Attachment (E39-F9) 12 2,000 *Material: Stainless steel *Material: Brass/nickel plating Ultracompact/Thin-sleeve Models E32-T33-S5 E32-T223R 2,000 10 1 dia. (0.5) Optical fiber: 1 dia. 0.5 dia. 1,000 20 25 25 5 0.25 dia. 10 Optical fiber: 1 dia. 12 10 0.5 dia. Sensing head* 3 dia. Sensing head* Fiber Attachment (E39-F9) Heat-shrinkable tube Fiber Attachment (E39-F9) *Material: Stainless steel E32-T333-S5 *Material: Stainless steel E32-T334-S5 20 1,000 20 25 0.125 dia. 5 10 12 Optical fiber: 1 dia. 0.25 dia. 3 dia. Heat-shrinkable tube Sensing head* Note: The Fiber Attachment is attached with adhesive and cannot be removed. 38 10 Fiber Attachment (E39-F9) *Material: Stainless steel 1,000 25 0.1 dia. 5 10 12 Optical fiber: 1 dia. 0.22 dia. 3 dia. Heat-shrinkable tube Sensing head* 10 Fiber Attachment (E39-F9) Note: The Fiber Attachment is attached with adhesive and cannot be removed. *Material: Stainless steel Through-beam Fiber Units Fine-beam (narrow vision field) Models E32-T22S E32-T24S Sensing head* 1.7 dia. 1.8 0.4 Optical fiber: 2.2 dia. Sensing head* 3 dia. 15 2,000 11 17.6 3.5 dia. Optical fiber: 2.2 dia. 3.2 *Material: Brass/nickel plating E32-T16W E32-T16WR Mounting bracket (provided as accessory) 3.2 3 Area-sensing Models 10 5 20.5 23 18 Sensing surface (3 x 30) 2,000 2 dia. 12 18.5 Sensing surface 2 *Material: Brass/nickel plating E32-M21 Optical axis 45 65 Sensing head: M3 x 0.35 *2 69 Two hexagonal nuts Two toothed washers Silicon tube *1 *1. One set of silicon tubes is black and the other set is gray. Use this difference to distinguish between the emission and reception sides. *2. Material: Stainless steel (SUS303) Sleeve Four, 1-dia. plastic fibers 13 Sensing head* 28 Two, 3.2-dia. mounting holes with 6-dia. countersinks Optical fiber: 2.2 dia. 2,000 1.8 11 E32-T16P E32-T16PR 2,000 23 *Material: ABS (sensing surface: PMMA) E32-T16J E32-T16JR E32-T16 Receiver Sensing surface (2 x 11) Two, 3.2 dia. Emitter 14.5 10.7 6-dia. countersink 4 19 27 20 3.3 14.5 10.7 Optical axis 2 Sensing surface (2 x 11) 15.5 8.85 4 8.4 3 Sensing head*1 Optical axis Sensing surface (2 x 11) 27 19 25 27 Lens* 20 Optical axis 20 4 4 Sensing head*1 Two, 3.2-dia. holes with 6-dia. countersinks Sensing head* Optical fiber: 2.2 dia. 2000 2,000 Sensing surface (2 x 10) (PMMA) 6 dia. 2,000 Optical fiber: 2.2 dia. *1. Material: Heat-resistant ABS (sensing surface: PMMA) *2. Provided with stickers with slits of width 0.5 and 1 mm (2 of each). Optical fiber: 2.2 dia. *Material: ABS for the sensing head and PMMA for the lens. *1. Material: Heat-resistant ABS (sensing surface: PMMA) *2. Provided with stickers with slits of width 0.5 and 1 mm (2 of each). Heat-resistant Models E32-T51 Two hexagonal nuts Two toothed washers Sensing head: M4 x 0.7* Optical fiber: 2.2 dia. 1.5 dia. E32-T54 Sensing surface 1 2.5 Optical fiber: 2.2 dia. Sensing head: 3 dia.* 2 dia. 45 7 2.85 dia. 1 1.7 2.4 15 17 25 2,000 *Material: Brass/nickel plating Note: The maximum allowable temperature is 150C. The maximum allowable temperature for continuous operation is 130C. 20 45 2,000 *Material: Stainless steel (SUS303) Note: The maximum allowable temperature is 150C. The maximum allowable temperature for continuous operation is 130C. 39 Through-beam Fiber Units Heat-resistant Models Indicates models that allow free cutting. E32-T81R-S Two hexagonal nuts Two toothed washers Sensing head: M4 x 0.7 *1 M2.6 x 0.45 Protective tube 3.6 dia. 2 dia. Fluororesin tube 7 20 2.2 dia. *1. Material: Stainless steel (SUS303) 13 *2 4 dia. 2.4 3 Sleeve 5 (75) 0.7 dia. 4 dia. Note: The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. 25 10 2,000 B A E32-T61-S E32-T84S-S A (14.2) 12 B 5 2,000 25 1 dia. 13 *2 R5 3 dia. 4 dia. 90 30 max. 6 Flexible tube: 2.9 dia. (stainless steel) Sleeve 2.2 dia. 7 4 dia. *3 3 20 Antislip tread 2.4 Sensing head *1 3 dia. Lens (2 dia.) Note: The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. 13 *2 5 10 2,000 25 B A *1. Material: Stainless steel (SUS303) *3. The diameter is 6 mm if the fiber length exceeds 10 m. *1. Material: Stainless steel (SUS303) 3.5 dia. 12 4 dia. Flexible tube: 2.8 dia. (stainless steel) Two hexagonal nuts Hexagonal caulking Two toothed washers 4 dia. Sleeve 2.2 dia. M2.6 x 0.45 Sensing head: M4 x 0.7 *1 Note: The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. Chemical-resistant Models E32-T11F E32-T12F Nut *1 Sensing head *1 Lens: 3 dia. Optical fiber: 2.2 dia. *2 Lens: 4 dia. Sensing head: 5 dia. Fluororesin 4 dia. Optical fiber: 2.2 dia. 7.2 dia. 10 (10 19.8 R3.6 .7) (35) 20 10 3 2,000 2,000 100 *1. Material: PFA *2. Sheath material: Fluororesin E32-T14F E32-T51F Sensing head: 5 dia. Fluororesin 4 dia. 2,000 Optical fiber: 2.2 dia. Lens: 3.7 dia. 4.5 Optical axis (21) 2,000 100 (20) Fluororesin 100 Optical fiber: 2.2 dia. Sensing head: 5 dia. E32-T81F-S 6 dia. 3.7 dia. PFA cover (R6) Protective tube 4 dia. Sleeve 13 *2 (70) (0.8) 30 2,000 A 40 PFA tube 2 dia. 5 25 B 2.2 dia. Note: The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. Through-beam Fiber Units Vacuum-resistant Models E32-T51V E32-T54V 1.15 dia. M4 x 0.7 * 1.15 dia. M2.6 x 0.45 Two nuts Two spring washers 4 dia. Optical fiber: 3 dia. 4 dia. M2.6 x 0.45 3 2.2 dia. 4.5 8 Connected to flange (vacuum side) 26 3 20 (30) 18 4 12 (15) 1,000 3 dia. * R9 4 5 dia. 4 dia. 3 dia. 4 dia. 2.2 dia. 1,000 (3) *Material: Aluminum 26 Connected to flange (vacuum side) *Material: Stainless steel (SUS304) E32-T84SV E39-F1V Lens (2 dia.) Sensing head: 3 dia.* (14.2) 12 1,000 0.5-dia. hole 8.9 12 30 max. 6 4 dia. 3.5 dia. R5 3 dia. 90 Flexible tube (stainless steel): 2.9 dia. 4 dia. 4 dia. 6 2.2 dia. M2.6 x 0.45 Effective depth: 3.8 Spot-facing depth: 0.9 26 Connected to flange (vacuum side) *Material: Stainless steel (SUS304) E32-VF4 Four, 10 dia. 49 36 dia. 24 8 E32-VF1 80 70 dia. 44 dia. (96) (63) 22 10 5 (23) 22 30 20 dia. 19 45 80 6 (33.53) Flange V40 O-ring Flange 90 dia. Note 1. Perform mounting so that the V40 O-ring is on the atmosphericpressure side of the vacuum chamber wall. 2. Mounting-hole cutout dimensions: 38 dia. 0.5 mm One nut M14 x 2 Two, connectors One spring V15 O-ring washer Note 1. Perform mounting so that the V15 O-ring is on the atmospheric-pressure side of the vacuum chamber wall. 2. Mounting-hole cutout dimensions: 14.5 dia. 0.2 mm 41 Dimensions (Unit: mm) Fiber Units with Reflective Sensors Standard/Flexible Models Indicates models that allow free cutting. E32-D211 E32-D211R E32-DC200 E32-D11R Two, 1 dia. Two hexagonal nuts Two toothed washers Sensing head* M6 x 0.75 4 dia. 3 4.8 10 Optical fiber: Two, 2.2 dia. 3.2 2.4 17 Two Fiber Attachments (E39-F9) Two hexagonal nuts 25 Two toothed washers 10 Sensing head: M4 x 0.7* Optical fiber: Two, 1 dia. Two, 0.5 dia. 3 2.4 15 7 2,000 2,000 *Material: Stainless steel (SUS303) *Material: ADC E32-DC200E E32-D21R Two, 0.5 dia. Two Fiber Attachments (E39-F9) Two hexagonal nuts 25 Two toothed washers 10 Sensing head: M3 x 0.5* Optical fiber: Two, 1 dia. 2.5 1.8 5.5 2,000 11 *Material: Stainless steel (SUS304) E32-D12 E32-D12R E32-D22 E32-D22R 2,000 Two, 3 dia. 1 dia. E32-D15X E32-D15XR 15 135 Sensing head* Heat-shrinkable tube Two, 0.5 dia. 15 12 *Material: Aluminum Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included E32-DC200B(B4) E32-DC200BR(B4R) 2.5 Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75 Optical fiber: Two, 2.2 dia. (fine thread) *2 Sensing surface: Two, 0.5 dia. Two, 2.2-dia. mounting 5 4.5 holes with two, 4.4-dia. countersinks on both sides *Material: Aluminum Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included Two Fiber Attachments (E39-F9) Two hexagonal nuts 25 StainlessTwo toothed washers 10 Sensing head: M3 x 0.5 *2 Two, 0.5 dia. 1.2 dia. steel tube max. (SUS304) Optical fiber: Two, 1 dia. 2.5 2.4 90 (40)*1 17 2,000 *1. ( ): E32-DC200B4 *2. Material: Brass/nickel plating E32-D14L E32-D14LR 1.8 90 (40)*1 5.5 E32-D24 E32-D24R Sensing head* 45 Heat-shrinkable tube Optical fiber: Two, 2.2 dia. 5.7 1.5 1 0.5 2 30 35 12 2,000 Light baffle 42 Two Fiber Attachments (E39-F9) E32-DC200F(F4) E32-DC200FR(F4R) Stainless-steel tube (SUS304) 2.5 dia. max. Sensing surface 25 2 2.5 1 2,000 Optical fiber: Two, 1 dia. Sensing head* 8 1.5 6 dia. 2,000 *Material: Brass/nickel plating Optical fiber: Two, 2.2 dia. 7.5 5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides 5.2 10 15 E32-D25X E32-D25XR 2,000 Sensing surface: Two, 1 dia. 3 Two, 1 dia. 3 Optical fiber: Two, 2.2 dia. *Material: Stainless steel (SUS304) Sensing head* 10 2.5 Two Fiber Attachments (E39-F9) 25 Optical fiber: 10 Sensing head: 3 dia.* 2.7 dia. Two, 1 dia. Light baffle *Material: Stainless steel (SUS304) 2,000 11 *1. ( ): E32-DC200F4 *2. Material: Stainless steel (SUS304) Two Fiber Attachments (E39-F9) 25 Stainless-steel tube: 2 dia. Sensing head: 3 dia.* Optical fiber: 10 Heat-shrinkable tube Two, 1 dia. 45 1.5 15 15 35 Sensing surface 12 2,000 *Material: Stainless steel (SUS304) Fiber Units with Reflective Sensors Standard/Flexible Models E32-D15Y E32-D15YR 2.8 E32-D25Y E32-D25YR 2.4 3 2.3 Sensing surface 15 Sensing head* 2,000 Sensing surface 12 2.5 Optical fiber: Two, 2.2 dia. 10 2.5 7.5 5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides 15 2.5 2.2 1.4 Optical fiber: Two, 2.2 dia. 1.2 0.9 2 4 *Material: Aluminum 5 4.5 Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included 2,000 Optical fiber: Two, 1 dia. 12 Sensing head* Sensing surface 2,000 2.5 7.5 5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides Two Fiber Attachments (E39-F9) 2.5 *Material: Aluminum 5 4.5 *Material: Aluminum Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included 25 3 8 10 25 Two Fiber Attachments (E39-F9) E32-D25Z E32-D25ZR Sensing head* 2,000 Optical fiber: Two, 1 dia. 8 Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included Sensing surface Sensing head* Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks 1.5 *Material: Aluminum E32-D15Z E32-D15ZR 3 1.4 2 Break-resistant/Coated Models E32-D11 E32-D11U Two, sixteen, Two hexagonal nuts 0.265 dia. Sensing head: Two toothed washers Protective tube M6 x 0.75* 2.4 5.2 10 Optical fiber: Two, 2.2 dia. 15 17 2,000 *Material: Brass/nickel plating E32-D21B E32-D21 Two Fiber Attachments (E39-F9) Two hexagonal nuts 25 Two toothed washers 10 Sensing head: M4 x 0.7* Optical fiber: Two, 1 dia. Two, four, 0.25 dia. 3.2 3 2.4 2,000 Material: Stainless steel (SUS303) E32-D221B 15 11 5.5 2,000 *Material: Brass/nickel plating E32-D22B Two Fiber Attachments (E39-F9) 25 Sensing head: 10 2.7 dia. 3 dia.* Optical fiber: Two, 1 dia. Two, four, 0.25 dia. 1.8 2.5 15 7 Two Fiber Attachments (E39-F9) 25 10 Optical fiber: Two, 1 dia. Two hexagonal nuts Sensing head: Two toothed washers Four, 0.25 dia. M3 x 0.5* Protective tube Attachment 25 Four, 0.25 dia. Optical fiber: Brancher (ABS): 3 dia. 1 dia. Sensing head *1 1.5 dia. 15 15 3 15 2,000 2,000 100 *1. Material: Stainless steel (SUS304) Note: The Attachment is attached with adhesive and cannot be removed. *Material: Brass/nickel plating E32-D15XB 10 E32-D25XB Sensing head* 15 Sensing surface: Two, sixteen, 0.265 dia. 3 10 2.5 2,000 12 Optical fiber: Two, 2.2 dia. 2,000 Optical fiber: Two, 1 dia. 25 2 8 1.5 2.5 7.5 5 Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides Sensing head* *Material: Aluminum Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included Two Fiber Attachments (E39-F9) 2.5 Sensing surface: Two, four, 0.25 dia. Two, 2.2-dia. mounting 5 4.5 holes with two, 4.4-dia. countersinks *Material: Aluminum Note: Mounting screws (countersunk screw M2 x 8 2 pcs) included 43 Fiber Units with Reflective Sensors Long-distance/High-power Models Indicates models that allow free cutting. E32-D16 E32-D11L 22 Two, 5.8-dia lenses 9 11 2,000 6.5 Two, 1.4 dia. 8.5 Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75* 4 dia. Optical fiber: Two, 2.2 dia. 17.5 Optical axis Optical axis Sensing head* Two, 3.2-dia. mounting holes with 6-dia. countersinks Optical fiber: Two, 2.2 dia. 5.2 10 2.4 3 20 2,000 *Material: Brass/nickel plating *Material: Aluminum E32-D21L E32-D22L Two Fiber Attachments (E39-F9) Two hexagonal nuts 25 Two toothed washers 10 Sensing head: M4 x 0.7* Optical fiber: Two, 1 dia. Two, 0.9 dia. 3.2 3 Two Fiber Attachments (E39-F9) 25 10 Sensing head: Optical fiber: Two, 1 dia. Two, 0.9 dia. 2.7 dia. 3 dia.* 3 2.4 15 7 15 2,000 *Material: Brass/nickel plating 2,000 *Material: Brass/nickel plating Ultracompact/Thin-sleeve Models E32-D33 E32-D331 Attachment Two Fiber Attachments (E39-F9) 25 10 Optical fiber: Two, 1 dia. Heatshrinkable tube Stainless-steel tube: 0.8 dia. Sensing head: 3 dia.* Two, 0.25 dia. Stainless-steel tube: 0.5 dia. Two, 0.125 dia. 25 Irraxtube: 1.2 dia. Sensing head: 2 dia. *1 10 Brancher: 3.5 dia. 15 15 15 15 12 15 2,000 2,000 35 *Material: Stainless steel (SUS303) 100 *1. Material: Stainless steel (SUS303) Note: The Attachment is attached with adhesive and cannot be removed. Coaxial/Small-spot Models E32-CC200 E32-CC200R E32-D32L 2,000 Sixteen, 0.25-dia. reception Emission fiber: fibers 1 dia. 2.5 dia. Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75* Optical fiber: Two 2.2 dia. Emission fiber: 1 dia. 15 Sensing head: 3 dia.* Sixteen, 0.265-dia. reception fibers 5.2 10 3 2.4 23 25 2,000 *Material: Stainless steel (SUS303) E32-C41 Two toothed Two hexagonal washers nuts Irraxtube: 2.6 dia. 1.8 Brancher (ABS resin): 3.5 dia. Fiber White markings: Attachment Optical fiber: Emission side Two, 1.2 dia. (heat-shrinkable tube) 15 (5) (100) 17 15 22 Heat-shrinkable tube Two Fiber Attachments (E39-F9) 25 10 Optical fiber: Two, 1 dia. Note: The Fiber Attachment is attached with adhesive and cannot be removed. 12 2 2,000 *Material: Stainless steel (SUS303) Note: There is a white line on the cable fiber that is inserted in the emitter-side port. E32-C42 1 x 0.175 dia. (emission fiber) Brancher (ABS resin) 3.5 dia. Sensing head: 2 dia.* 3 dia. 15 2 25 1,000 22 Four, 0.25-dia. reception fibers 6 x 0.175 dia. (reception fibers) 10 *Material: Stainless steel (SUS303) 44 Sensing head: 2 dia.* 3 dia. 12 Note 1. There is a white line on the cable fiber that is inserted in the emitter-side port. 2. The core diameter of the sensing head is assumed to lie in the range 2.44 to 2.49 mm. Sensing head: M3 x 0.5* Optical fiber: Two 2.2 dia. Note: There is a yellow dotted line on the fiber that is inserted in the emitter-side port. Emission fiber: 0.5 dia. 6 x 0.175 dia. (reception fibers) Brancher (heat-resistant, ABS, black): 6 dia. E32-D32 Two Fiber Attachments (E39-F9) 25 10 Two hexagonal nuts Optical fiber: Emission fiber: Sensing head: Two toothed washers M3 x 0.5* Heat-shrinkable tube Two, 1 dia. 0.5 dia. 1 x 0.175 dia. (emission fiber) 1,570 *Material: Stainless steel (SUS304) Note: There is a white line on the fiber that is inserted in the emitter-side port. E32-C31 20 15 2,000 *Material: Brass/nickel plating Four, 0.25-dia. reception 2.5 fibers 400 White markings: Two Fiber Attachments Emission side (heat-shrinkable tube) Optical fiber: Two, 1.2 dia. Irraxtube: 2.6 dia. 15 (5) (100) 10 25 1,000 22 *Material: Stainless steel (SUS303) Note: The Fiber Attachment is attached with adhesive and cannot be removed. Fiber Units with Reflective Sensors Area-sensing Models E32-D36P1 25 2,000 5 10 Optical fiber: Two, 2.2 dia. 15 Two, 3.2-dia. mounting holes 2 10.85 32 x 0.265 dia. (emission and reception fibers in alternating arrangement) 5 *Material: Brass/nickel plating Sensing head* Retroreflective Fiber Units E32-R21 (An E39-R3 Reflector is provided as an accessory.) E32-R16 (An E39-R1 Reflector is provided as an accessory.) 27 15 Two Fiber Attachments Two hexagonal nuts Lens Two washers Silicon tube (PMMA) Sensing head* M6 x 0.75 Optical fiber: Two, 1 dia. 5 dia. 25 7 10 10 7.2 16 (6) 4 Sensing head *1 2.2 10 3 2.8 11 17.8 14 2,000 21.5 8 15.2 *Material: ABS 27.8 Optical fiber: Two, 2.2 dia. Standard length: 2 m Lens (PMMA) Two, M3 set screws (provided) *1. Material: ABS Convergent-reflective Models E32-L24S E32-L16 2,000 11 Optical fiber: Two, 2.2 dia. 4 2,000 25 Optical fiber: Two, 1 dia. 3.5 10 17.5 12.3 9 3.6 dia. 11 2.2 dia. 2 Optical axis 2.5 22.5 4.5 Two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides 14 3.5 7 Optical axis 2.5 Sensing head* 2 0.75 1 *Material: ABS *Material: ABS Sensing head* 3.8 Two Fiber Attachments (E39-F9) E32-L24L Two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides 1.7 E32-L25L Sensing distance 4 3.6 3.3 Two, 3.2-dia. lenses 1.5 18 3.3 20 Two, 3.2-dia. lenses Side-view prism (PC) 10 Optical fiber: Two, 1 dia. 6.5 Sensing distance 18 Two Fiber Attachments (E39-F9) 25 6 25 6 Optical axis 4 Two Fiber Attachments (E39-F9) 4 16 Sensing head* Sensing head* Two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides Two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides 2,000 2,000 *Material: Polycarbonate *Material: Polycarbonate E32-L25 20 10 5 6.5 20 10 Optical fiber: Two, 1 dia. 6.5 4 Sensing distance E32-L25A 5 4 20 10 Sensing distance 4.8 4.8 6.5 6.5 20 Optical fiber: Two, 2.2 dia. 6.5 Sensing head* Sensing head* Two, 3.2-dia. holes with 6-dia. countersinks Two, 3.2-dia. holes with 6-dia. countersinks 2,000 2,000 *Material: Heat-resistant ABS Note: There is a white line on the fiber that is inserted in the emitter-side port. Optical fiber: Two, 2.2 dia. Note: There is a white line on the fiber that is inserted in the emitterside port. *Material: Heat-resistant ABS 45 Fiber Units with Reflective Sensors Convergent-reflective Models Indicates models that allow free cutting. E32-L86 A B 2,000 33.5 19 11 7 Optical axis Two, 4 dia. Note: The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. 25 5 (max.) 13 *2 18 8.9 27 4 dia. Two, 3.2-dia. holes with 6-dia. countersinks on one side 5.5 Sensing head (stainless steel) Flexible tube: 2.8 dia.*1 *1 Material: Stainless steel Heat-resistant Models E32-D51 Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75* Two, 1.5 dia. Optical fiber: Two, 2.2 dia. 4.9 3.1 2.4 3 10 13 17 2,000 *Material: Brass/nickel plating Note: The maximum allowable temperature is 150C. The maximum allowable temperature for continuous operation is 130C. E32-D81R-S E32-D81R Using the E32-D81R-S Two toothed washers (SUS) Two hexagonal nuts (SUS) Sensing head: M6 x 0.75 *1 SUS flexible tube Protective tube (gray) (4.2 dia.) 5 dia. Fiber: 1.2 dia. M4 x 0.7 Using the E32-D81R SUS303 2.2 dia. Sleeve 5 dia. 4.5 8.5 8 15 3 2 3 Note 1. The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. 2.2 dia. Sleeve 11.5 15 B 5 (70) 5 20 2,000 5 10 *2 2. Confirm applicable Amplifier Units before placing an order. (Refer to Precautions for Correct Use.) 6.5 5 16.5 6.4 13 *2 B A *1. Material: Stainless steel (SUS303) E32-D61-S E32-D61 Using the E32-D61-S 1.4 dia. M4 x 0.7 Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75 *1 5 dia. *3 3.5 dia. Using the E32-D61 Hexagonal caulking 5 dia. 2.2 dia. Sleeve 5 dia. SUS316L Sleeve 4.5 8.5 10 3 2 20 2.4 3 5 2,000 5 *4 Note 1. The maximum allowable temperatures for sections A and B are 350C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. SUS flexible tube 11.5 15 A 8 5 10 *2 5 B 16.5 *2 13 6.5 15 2. Confirm applicable Amplifier Units before placing an order. (Refer to Precautions for Correct Use.) 6.4 B *1. Material: Stainless steel (SUS303) *3. The diameter is 6 if the fiber length exceeds 10 m. *4. The diameter is 10 if the fiber length exceeds 10 m. E32-D73-S E32-D73 1 dia. Using the E32-D73-S Two hexagonal nuts Two toothed washers SUS flexible tube Sensing head: M4 x 0.7 *1 5 dia. 4 dia. 2.8 dia. Stainless-steel tube: 1.25 dia. 1.65 dia. 2.5 dia. Using the E32-D73 Hexagonal caulking 5 dia. 2.2 dia. Sleeve SUS316L Sleeve 4.5 8.5 7 5 5 2.4 5 60 20 10 2,000 A B 11.5 10 *2 5 15 8 5 16.5 C 6.5 *2 13 Note 1. The maximum allowable temperatures for sections A, B, and C are 400C, 300C, and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), how15 ever, must stay within the Amplifier Unit's operating temperature range. 2. Confirm applicable Amplifier Units before placing an order. (Refer to Precautions for Correct Use.) 6.4 C *1. Material: Stainless steel (SUS303) Chemical-resistant Models E32-D12F E32-D14F 2,000 (26) Sensing head: 6 dia. Fluororesin 5 dia. Optical fiber: Two, 2.2 dia. 16 2,000 46 100 4.5 Optical Sensing head: 7 dia. axis Optical-axis mark 100 Fluororesin tube (protective cover) Optical fiber: 2.2 dia. Dimensions (Unit: mm) Application-corresponding Fiber Units Label-detection Models E32-G14 36.3 2,000 25.2 20 Sensing head* 9.2 R1.6 R1.6 Liquid-level Detection Models E32-D36T R3.5 24 Lens (PMMA) 3.2 10 Optical axis 9 15 1.6 Optical fiber: Two, 2.2 dia. 1.6 9.4 5 5 20.4 Eight, R0.5 Optical fiber: Two, 2.2 dia. Emission side: Sixteen, 0.265 dia. Sensing head 13.25 2 23.5 4 4 2,000 23.45 11.4 R10 8.4 8 7.6 5 *Material: ABS Thirty-two, 0.265 dia.* 4.4 Reception side: Sixteen, 0.265 dia. E32-L25T 2.8 Two, 3.2-dia. lenses (PC) 1.2 Two Fiber Attachments (E39-F9) 25 16 10 (13) 15.2 4 Optical fiber: Two, 1 dia. Mounting hole 6 6 Sensing head (PC) 18 E32-A01 2,000 E32-A02 Sensing head* Sensing head* Optical fiber: 2.2 dia. Optical fiber: 2.2 dia. 14.5 4.5 3.3 1.7 Tube holder Sensing surface (2 x 11) 4.2 7 20 Optical axis 27 5,000 Tube holder Sensing surface (2 x 11) Receiver 19.9 3 Optical axis 12 4.5 27 21 5 5,000 *Material: ABS for the sensing head, PMMA for the prism, and PBT for the pipe holder. *Material: ABS for the sensing head, PMMA for the prism, and PBT for the pipe holder. Emitter E32-D82F1 E32-D82F2 Sensing head (fluororesin): 6 dia. Fiber connector (brass/nickel plating): 9 dia. 8 dia. Optical fiber: Two, 2.2 dia. *2 Note: The maximum allowable temperatures for sections A and B are 200C and 85C, respectively. To the Amplifier Unit 7.2 Length of unbendable section: 150 (350) *1 27 42 2,000 2,000 A B 1,500 mm from the tip *1. ( ): E32-D82F2 *2. The 2-m section of optical fiber on the Amplifier-unit side is plastic and therefore allows free cutting. 47 Application-corresponding Fiber Units Models for Glass-substrate Alignment/Mapping Indicates models that allow free cutting. E32-A08 E32-A07E1(E2) E32-L66 21.7 14 1 2,000 24.5 10.7 6.5 3.8 A 11 B 2,000 25 5 7 13 *2 Reception fiber: 2.2 dia. 18 12 1.1 Two, 3.2-dia. mounting holes with four, 6-dia. countersinks Optical axis 2.2 dia. Two, 3.2-dia. mounting holes with 6-dia. countersinks Emission fiber: 2.2 dia. 4 dia. *1. Material: Stainless steel (SUS303) Sensing head *1 5.5 5 36 Two, 2.8-dia. flexible tubes (stainless steel) * The E32-A07E1(E2) has a reception fiber and an emission fiber. Use the fiber with a model display tube (fiber with blue dotted line) as light emitting side. Note: The maximum allowable temperatures for sections A and B are 300C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. E32-A09 E32-A09H E32-A09H2 Optical axis 2,000 23 9 7 Two, 3.2-dia. mounting holes with 6-dia. countersinks *Material: Aluminum Sensing head* 5 28 13 *2 2.8-dia. flexible tubes* 8.9 24 Lens: 5.8 dia. 12 B 2,000 Two, 3.24-dia. mounting holes with four, 6-dia. countersinks Optical fiber: Two, 2.2 dia. 8.9 20 Lens: 5.8 dia. A 30 12 7 Optical 9 axis Sensing head *1 2.2 dia. 5 dia. 4 dia. *1. Material: Stainless steel Note: The maximum allowable temperatures for sections A and B are 300C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. Wafer-mapping Models E32-A03 0.4 E32-A03-1 2,000 20.5 1.8 Two, R1.6 25 2,000 24.5 3.2 Stamp (1-mm dia.) 10 4.3 17.6 11 3 dia. 3.4 Sensing head *1 R1.6 3.2 Fiber Attachment (E39-F9) 4.5 10 E39-L83 Mounting Bracket (SUS) 13 Sensing surface *Material: Brass/nickel plating 2 dia. 3.5 3 10 2 Optical fiber: 1 dia. 18.5 3 dia. 6.5 3 12.5 25 Stamp (1-mm dia.) Two, 3.4 dia. Fiber Attachment (E39-F9) *Material: Brass/nickel plating Sensing head * 2 dia. Sensing surface 10 Note: Use the stamped surface and its opposing surface as installation (reference) surfaces. Note 1. Use the stamped surface and its opposing surface as installation (reference) surfaces. 2. Set of two symmetrical parts. E32-A04 E32-A04-1 4 25 2,000 20.5 Four, R1.35 Stamp (1-mm dia.) Optical fiber: 1 dia. 21 10 2 dia. 2 2 dia. 2 2 Sensing head * 1.2 dia. 2 *Material: Stainless steel (SUS303) Installation (reference) surface Sensing surface Note: Use the stamped surface and its opposing surface as installation (reference) surfaces. 48 9 1.2 Optical axis Sensing surface Optical fiber: 1 dia. 10 4 2 dia. Fiber Attachment (E39-F9) Stamp (1-mm dia.) 2,000 25 2 2.5 Two, M2 3.5 10 17 1.2 dia. 2 Note: Set of two symmetrical parts. Fiber Attachment (E39-F9) Sensing head * *Material: Stainless steel (SUS303) Accessories Lens Units Lens Units E39-F1 Side-view Units E39-F2 M2.6 Effective depth: 3.2 2.8 dia. Spot-facing depth: 0.9 M2.6 x 0.45 Effective depth: 3.8 Spot-facing depth: 0.9 4 dia. 4 dia. 5.7 8.9 Material: Brass for the body and optical glass for the lens itself. Material: 9.2 Brass for the body and optical glass for the lens itself. Note: Two per set. Note: Two per set. Reflection Unit with Lens M3 internally E39-F3 Two, 4 dia. toothed washer Two, M3 x 3 slotted-head set screws* 12 6.4 18 Material: Brass for the body and aluminum for the base. Two, 3.2 dia. 6.4 3 80.2 3.6 M3 x 6 angle-setting screw 6.5 20.7 8.5 *Secure the fiber head with the slotted-head set screws. Do not insert a lens (E39-F1). Lens Unit for Reflective Fiber Units E39-F3A Lens Unit for Reflective Fiber Units E39-F3A-5 M2 x 2 Allen-head set screw (for securing the fiber) Straight knurling 6 dia. 4 dia. 3 Lens surface (lens diameter: 3.7 mm) Material: Aluminum for body and optical glass for lens. 13 2.1 dia. 23 Note: This is the Lens Unit for the E32-D32 and E32C42. Lens Unit for Reflective Fiber Units E39-F3B 6.5 16.5 Lens surface (lens diameter: 3.7 mm) Material: Aluminum for body and optical glass for lens Note: This is the Lens Unit for the E32-C31 and E32-C41. Straight knurling 5 dia. 4.3 dia. 5.8 Material: Aluminum for body and optical glass for lens. M3 x 0.5 Effective screw length: 3 Lens Unit for Reflective Fiber Units E39-F3C 6 dia. 5.5 dia. Lens surface (lens diameter: 4.8 mm) 2.1 dia. 5 dia. 4 dia. 24.1 25.2 M3 x 0.5 Depth: 4.4 Note: This is the Lens Unit for the E32-C31 and E32-C41. M3 x 0.5 Effective screw length: 3 10.9 Lens surface (lens diameter: 3.7 mm) Material: Aluminum for body and optical glass for lens. Note: This is the Lens Unit for the E32-C31 and E32-C41. 49 Accessories Protective Spiral Tubes E39-F32A/F32A5 E39-F32B/F32B5 M3 x 0.5; depth: 4 Head connector *1 (4.6 dia.) End cap *1 3 dia. 6 dia. 12 12 Tube *2 L *1. Material: Brass/nickel plating *2. Material: Stainless steel (SUS304) Note 1. The length L is 1,000 for the E39-F32A/-F32B and 500 for the E39-F32A5/-F32B5. 2. The E39-F32B(5) consists of two E39-F32A(5)s. E39-F32C/F32C5 M4 x 0.7; depth: 4 Head connector *1 (5.6 dia.) End cap *1 4 dia. 7 dia. 12 12 Tube *2 L *1. Material: Brass/nickel plating *2. Material: Stainless steel (SUS304) Note: The length L is 1,000 for the E39-F32C and 500 for the E39-F32C5. E39-F32D/F32D5 M6 x 0.75; depth: 4 Head connector *1 (7 dia.) End cap *1 5 dia. 8.5 dia. 12 12 Tube *2 L *1. Material: Brass/nickel plating *2. Material: Stainless steel (SUS304) Note: The length L is 1,000 for the E39-F32D and 500 for the E39-F32D5. Other Accessories Fiber Cutter E39-F4 8 Thin-fiber Attachments E39-F9 45 1.1 dia. Mark indicating position of insertion into Amplifier Unit 24.5 (2.2 dia.) Material: ABS 3.6 dia. Retention Fiber: 2.2 dia. clip *2 Retention clip *2 Splice *1 3.8 dia. 11.7 25 Note: Two per set. *Provided with thin-fiber models. Standard-fiber insertion hole Thin-fiber insertion hole Fiber Connector E39-F10 10 Fiber: 2.2 dia. 3 dia. 26 12.8 *1. Material: Polyester *2. Material: Brass Fiber Connector E39-F13 E39-F14 E39-F15 (48.6) 9.2 32.6 29.6 7.6 3.2 2 Note: Dimension A varies with the model number as shown in the following table. 8 33.8 22.4 20.4 Four, 6 dia. Four, A (See note.) Four, 0.8 Sleeve Bender E39-F11 10.8 R12.5 R7.5 27 50 42.5 10 10 Four, R0.8 R5 R10 27.4 Model E39-F13 E39-F14 E39-F15 Dimension A 2.4 1.2 2.4/1.2 Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Fiber Units Mounting Tightening Force The tightening force applied to the Fiber Unit should be as follows: Screw-mounting Model Fiber Cutting Procedure Cut a thin fiber as follows: An attachment is temporarily fitted to a thin fiber before (1) shipment. Temporarily fitted Secure the attachment after adjusting (2) the position of it in the direction indicated by the arrow. Insert the fiber to be cut into the E39-F4. (3) Two holes for thin fiber Retaining screw (flat head or sunken head) (M3 max.) Toothed washers Three holes for standard fiber (2.2-mm dia.) Use a proper-sized wrench. Nuts (attachment) E32-M21 E32-T16 E32-R21 E32-T16W(R) E32-T16P(R) E32-T16J(R) E32-L24S E32-L24L E32-T25L Cutter (E39-F4) Cylindrical Model Spring mounting clip Fiber Units M6 screw/ 6-mm dia. cylinder M3/M4 screw 2-mm dia./3-mm dia. cylinder 1.5-mm dia./1-mm dia. cylinder E32-L25A Thin fiber attachment (E39-F9) (4) Finished state (proper cutting state) Approx. 0.5 mm Insertion direction Note: Insert the fiber in the direction indicated by the arrow. Clamping torque 0.98 N*m max. 0.78 N*m max. 0.29 N*m max. 0.2 N*m max. 0.78 N*m max. Up to 5 mm to the tip: 0.49 N*m max. More than 5 mm from the tip: 0.78 N*m max. 0.49 N*m max. 0.39 N*m max. Connection * Do not pull or press the Fiber Units. The Fiber Units have a withstand force of 9.8 N or 29.4 N maximum. * Do not bend the Fiber Unit beyond the permissible bending radius given under Ordering Information. * Do not bend the edge of the Fiber Units (excluding the E32-T@R and E32-D@R). Correct Incorrect 20 mm min. Amplifier Unit Fiber Unit 20 mm min. 0.29 N*m max. * Do not apply excess force on the Fiber Units. Correct Incorrect Fiber Unit Nylon wireholder Chemical-resistive Models The following method is recommended to prevent the fluororesin case from cracking when the Sensor is being secured. Be especially careful not to crack the case when using screws to secure the Sensor. The Fiber Head could be broken by excessive vibration. To prevent this, the following is effective: Fiber Sensing Head A one-turn loop can absorb vibrations. Tape 51 E39-F11 Sleeve Bender * The bending radius of the stainless steel tube should be as large as possible. The smaller the bending radius becomes, the shorter the sensing distance will be. * Insert the tip of the stain1.2 mm dia. max. less steel tube to the 1.3 mm dia. min. R10 mm Sleeve Bender and bend the stainless steel tube R12.5 mm R5 mm slowly along the curve of R7.5 mm the Sleeve Bender. Fiber tip position mark 90 max. Stainless steel tube 10 mm 10 mm Heat-resistant Fiber Units (E32-D51 and E32-T51) * The fibers of these Units cannot be extended using the E39F10 Fiber Connector. * The maximum allowable temperature for continuous operation with these Units is 130C. It is 150C for short-term use. E32-T14 and E32-G14 Stickers Wafer Sensors (E32-L25(A)) * To ensure correct performance, insert the fiber with a white line into the emitter-side port of the Amplifier Unit. E32-T16 and E32-T16P Example E32-T16's sensing head Slit provided To use the slit provided, peel off the backing sheet, align it with the edges of the sensing surface, and attach it to the sensing head. Use the slit in applications where saturation occurs (i.e., changes in light intensity cannot be obtained) due to short sensing distances. E32-M21 Separate the 4 fibers by distances sufficient to prevent interference. Vacuum-resistant Fiber Units (E32-V) Although Flanges, Fiber Units on the vacuum side, and Lens Units have been cleaned, as an extra precaution, clean these products with alcohol before use in high-vacuum environments to ensure that they are properly degreased. Liquid-level Detection Sensors (E32-D82F) * Secure the Fiber Unit using the unbendable section. Otherwise, the liquid-level detection position may be displaced. * For applications in hazardous environments, install the Fiber Unit in the hazardous environment but install the Amplifier Unit in a safe environment. 52 E32-A07E1(E2) There is a difference in sensing object angle between E32-A07E1 and E32-A07E2. Select a model in accordance with the bending direction of a sensing object. Use the fiber with a model display tube as light emitting side. View from the cable drawing side Sensing object Emission Reception E32-A07E2 Reception Emission E32-A07E1 Adjustment Do not bend here. These Units may enter the light-ON state if there are reflecting objects at the ends of the lenses. In this case, attach the black stickers provided to the ends of the lenses. Liquid-level Detection Sensors: Tube-mounting Models * Ensure that the tube is not deformed when using a band to secure the Fiber Unit. * Drops of water, bubbles, or haze inside the tube may cause malfunctions. E32-G14 The sensing distance is short, making the incident light intensity large. This makes it impossible to teach without a workpiece. Perform teaching with and without a workpiece. Liquid-level (E32-D82F) Detection Position The liquid-level detection position is at a distance of 5.22 mm from the end of the fluororesin section. Liquid-level detection position (Refer to the diagram on the 5.22 mm (from the end of the right.) fluororesin section) The liquid-level detection position varies with the surface tension of the liquid and the degree of wetness at the Fiber Unit's detection position. Other Considerations Liquid Level (E32-D82F) * Operation may become unstable in the following cases: A Bubbles stick to the cone of the sensing head. B Solute is deposited on the cone of the sensing head. C The liquid has a high viscosity. * There are some liquids, such as milky white liquids, for which detection is not possible. * Do not let the end of the fluororesin section bump into another object. Damage to, or deformation of, the sensing head may result in unstable operation. Heat-resistant Fiber Units (E32-D81R, E32-D61, and E32D73) The pitch of the emission-side and reception-side fiber-insertion ports varies with the Amplifier Unit. Be sure to use an appropriate Fiber Unit. Amplifier Unit E3X-DA@-S E3X-MDA@ E3X-DA@-N E3X-NA@ Fiber Unit E32-D@-S E32-D@ Chemical-resistant Fiber and Liquid Level (E32-D82F) Fluororesin has high chemical resistance. However, applications in the atmosphere of vaporized chemicals (gases) or steam may cause malfunction or damage inside sensors. Run a full check before using in such environments. Accessories Use of E39-R3 Reflector 1. Use detergent, etc., to remove any dust or oil from the surfaces where tape is applied. Adhesive tape will not be attached properly if oil or dust remains on the surface. 2. The E39-R3 cannot be used in places where it is exposed to oil or chemicals. E39-F32@ Protective Spiral Tubes 1. Insert a fiber to the Protective Spiral Tube from the head connector side (screwed) of the tube. E39-F10 Fiber Connector Mount the Fiber Connector as shown in the following illustrations. Fiber Unit Splice Fiber Unit Retention unit Protective Spiral Tube Retention unit Fiber Unit Fiber Unit 2. Push the fiber into the Protective Spiral Tube. The tube should be straight so that the fiber is not twisted when inserted. Then turn the end cap of the spiral tube. 3. Secure the Protective Spiral Tube on a suitable place with the attached nut. Protective Spiral Tube Mounting panel Protective Spiral Tube 4. Use the attached saddle to secure the end cap of the Protective Spiral Tube. To secure the Protective Spiral Tube at a position other than the end cap, apply tape to the tube so that the portion becomes thicker in diameter. Fiber Unit Fiber Unit * The Fiber Units should be as close as possible when they are connected. Sensing distance will be reduced by approximately 25% when fibers are connected. * Only 2.2-mm dia. fibers can be connected. Hexagon clamping nut Fiber Unit Toothed washer Saddle Tube End cap 53 READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. A host of remarkable functions inside a compact body. A complete lineup of sensor heads to handle an even wider range of applications. This is the platform for OMRON's sensing technology. Laser-type Smart Sensors ZX-L Series Linear Platform Inductive Displacement Smart Sensors ZX-E Series High-resolution sensing using laser and magnetic technology. Smart Monitor An improved lineup for smarter sensing. Digital Fiber Sensors E3X-DA-S Series/MDA Series ON/OFF Platform A lineup of Smart Sensors that use the eddy current method. Laser-type Photoelectric Sensors with Separate Digital Amplifiers E3C-LDA Series A common platform for Fiber Sensors and Sensors with Separate Amplifiers. Mobile Console Refinement and a new generation that goes beyond superior performance. Photoelectric Sensors with Separate Digital Amplifiers have joined the Smart Sensor family. This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions. Note: Do not use this document to operate the Unit. Authorized Distributor: Note: Specifications subject to change without notice. 2007. 12 OMRON Corporation In the interest of product improvement, specifications are subject to change without notice. Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.